Have 2 Allo DigiOne transports and Bryston Digital player in three different zones with roon core server on iMac MacOS Sequoia 15.1.1 everything has ran smooth in all zones for very long time but in the last month or so the zones running the Allo transports will not detect both transports at same timed if I leave both units plugged in at same time either one will play but if I disconnect one, Does not matter which zone the other one still plugged in works just fine. None of this problem affects the zone that the Bryson is in. I did not notice if this was an effect that appeared after an update or not I have uninstalled and reinstalled both Roon and RoonBridge but this did not correct the issue, Was wondering if anybody has ran into same issues Thanks
There are known issues with Sequoia 15.1.1. You can use the magnifier, upper right, to search on Sequoia 15.1.1 and see if any of those match your issues.
Hi @Dave_Both,
Thanks for writing in to ask us about this issue. As @Mike_LC noted there is an ongoing issue with Roon and Sequoia that may be affecting you. Can you please navigate to macOS System Settings > Privacy & Security > Local Network , and make sure Roon is allowed. If it is already enabled, toggle it off and on again. Then reboot your Mac, and see if the same issue persists.