# Are Roon working towards **URL:** \ **Category:** Roon Software Discussion\ **Created:** [June 20, 2020, 8:12am UTC](https://community.roonlabs.com/t/are-roon-working-towards/111419 "2020-06-20T08:12:06Z")\ **Posts on this page:** 1\ **Showing post:** 11
**Author:** ![BlackJack](https://community.roonlabs.com/user_avatar/community.roonlabs.com/blackjack/32/39743_2.png) [@BlackJack](https://community.roonlabs.com/u/BlackJack)\ **Post date:** [June 20, 2020, 1:12pm UTC](https://community.roonlabs.com/t/are-roon-working-towards/111419/11 "2020-06-20T13:12:02Z")
If you have the filters, you can load them into Roon. ATM you need third-party software to measure your room, speakers and eventually generate the filters. While I can’t speak for Roon Labs, it’s their usual policy to not comment on feature requests and/or future plans. However, there are already feature requests for integrating third-party room correction software into Roon: [Search results for 'dirac #roon:feature-requests' - Roon Labs Community](https://community.roonlabs.com/search?q=dirac%20%23roon%3Afeature-requests) And also a general one: > [@Automated Room Correction](https://community.roonlabs.com/t/automated-room-correction/35515): > > Given that the DSP engine already offers the ability to enter room correction parameters based on third-party software measurements, it would be wonderful if the measurement aspect could somehow be integrated into Roon. The idea would be to connect a microphone (or use the mic on a mobile device), run the measurement software thru Roon (could be someone else’s software licensed to Roon), and have the relevant data automatically update the Roon DSP. If this were available, I can’t think of any … --- _[View the full topic](https://community.roonlabs.com/t/are-roon-working-towards/111419)._