# Automated Room Correction

**URL:** <https://community.roonlabs.com/t/automated-room-correction/35515>\
**Category:** Feature Suggestions\
**Created:** [December 22, 2017, 4:30pm UTC](https://community.roonlabs.com/t/automated-room-correction/35515 "2017-12-22T16:30:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Robert\_Siegel](https://community.roonlabs.com/letter_avatar/robert_siegel/32/5_5575768a8748004e209b776fc1b2916d.png) [@Robert\_Siegel](https://community.roonlabs.com/u/Robert_Siegel)\
**Post date:** [December 22, 2017, 4:30pm UTC](https://community.roonlabs.com/t/automated-room-correction/35515/1 "2017-12-22T16:30:52Z")

</div>

Given that the DSP engine already offers the ability to enter room correction parameters based on third-party software measurements, it would be wonderful if the measurement aspect could somehow be integrated into Roon. The idea would be to connect a microphone (or use the mic on a mobile device), run the measurement software thru Roon (could be someone else’s software licensed to Roon), and have the relevant data automatically update the Roon DSP. If this were available, I can’t think of any reason why every Roon subscriber wouldn’t use it. I would be willing to pay an additional one time fee for something like this.

---

<div class="post-metadata">

**Author:** ![anon29757629](https://community.roonlabs.com/letter_avatar/anon29757629/32/5_5575768a8748004e209b776fc1b2916d.png) [@anon29757629](https://community.roonlabs.com/u/anon29757629)\
**Post date:** [December 22, 2017, 5:07pm UTC](https://community.roonlabs.com/t/automated-room-correction/35515/2 "2017-12-22T17:07:10Z")

</div>

A very big +1 from me. I will post another 1000 😉