# Chirping Nucleus+ **URL:** \ **Category:** Nucleus\ **Created:** [October 31, 2019, 5:44pm UTC](https://community.roonlabs.com/t/chirping-nucleus/82800 "2019-10-31T17:44:40Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![John\_Burn](https://community.roonlabs.com/letter_avatar/john_burn/32/5_5575768a8748004e209b776fc1b2916d.png) [@John\_Burn](https://community.roonlabs.com/u/John_Burn)\ **Post date:** [October 31, 2019, 5:44pm UTC](https://community.roonlabs.com/t/chirping-nucleus/82800/1 "2019-10-31T17:44:40Z")
Does your v2 also chirp? At least 2 of us on here have this issue. Put your ear within a few metres of the box and see if you can hear a morse code / chirping electronic noise. I suspect the hardware will need swapping but I’ve yet to hear what’s happening with it. John. ---
**Author:** ![Peter\_Bliss](https://community.roonlabs.com/letter_avatar/peter_bliss/32/5_5575768a8748004e209b776fc1b2916d.png) [@Peter\_Bliss](https://community.roonlabs.com/u/Peter_Bliss)\ **Post date:** [October 31, 2019, 6:35pm UTC](https://community.roonlabs.com/t/chirping-nucleus/82800/13 "2019-10-31T18:35:56Z")
Have not heard a chirp. Does it happen during down time, processing time, power up, power down? I will listen for it and report back. I did run into some remote (iPad) connection problems when I started auditioning DACs. The iPad would lose connection and I could not do any DAC setup. Had to reinstall the core several times. I tried an RME ADI2, Lynx Hilo, AudioQuest Cobalt, ADL GT40, and a Chord Qutest. The Chord was the clear winner in my system which consists of vintage McIntosh tubes and Klipsch horns. The connection is now stable with the Chord. ---
**Author:** ![SSK84](https://community.roonlabs.com/letter_avatar/ssk84/32/5_5575768a8748004e209b776fc1b2916d.png) [@SSK84](https://community.roonlabs.com/u/SSK84)\ **Post date:** [October 31, 2019, 9:01pm UTC](https://community.roonlabs.com/t/chirping-nucleus/82800/14 "2019-10-31T21:01:17Z")
Could be the ssd! ---
**Author:** ![John\_Burn](https://community.roonlabs.com/letter_avatar/john_burn/32/5_5575768a8748004e209b776fc1b2916d.png) [@John\_Burn](https://community.roonlabs.com/u/John_Burn)\ **Post date:** [November 1, 2019, 11:49am UTC](https://community.roonlabs.com/t/chirping-nucleus/82800/15 "2019-11-01T11:49:30Z")
It’s constant, and starts about 20 seconds after boot up and doesn’t stop… I can hear it from 3 or 4 metres away too. It’s pretty frustrating. John. ---
**Author:** ![SSK84](https://community.roonlabs.com/letter_avatar/ssk84/32/5_5575768a8748004e209b776fc1b2916d.png) [@SSK84](https://community.roonlabs.com/u/SSK84)\ **Post date:** [November 1, 2019, 2:01pm UTC](https://community.roonlabs.com/t/chirping-nucleus/82800/16 "2019-11-01T14:01:40Z")
Then it isn’t the SSD. CPU whine. They should test this before shipping though (even it is highly individual how it is perceived). ---
**Author:** ![danny](https://community.roonlabs.com/user_avatar/community.roonlabs.com/danny/32/48349_2.png) [@danny](https://community.roonlabs.com/u/danny)\ **Post date:** [November 6, 2019, 9:09pm UTC](https://community.roonlabs.com/t/chirping-nucleus/82800/17 "2019-11-06T21:09:19Z")
Take a software update… I fixed it. While we never enabled TurboBoost on that CPU (too much heat far too fast to cool passively), I never reduced the voltage required only to run that fast. “Roon Labs Software 1.0.12” fixes that. ---
**Author:** ![danny](https://community.roonlabs.com/user_avatar/community.roonlabs.com/danny/32/48349_2.png) [@danny](https://community.roonlabs.com/u/danny)\ **Post date:** [November 18, 2019, 3:05pm UTC](https://community.roonlabs.com/t/chirping-nucleus/82800/23 "2019-11-18T15:05:16Z")
A post was merged into an existing topic: [Scratchy or static like noise](https://community.roonlabs.com/t/scratchy-or-static-like-noise/78052/37) ---
**Author:** ![dylan](https://community.roonlabs.com/user_avatar/community.roonlabs.com/dylan/32/157733_2.png) [@dylan](https://community.roonlabs.com/u/dylan)\ **Post date:** [February 12, 2020, 2:08pm UTC](https://community.roonlabs.com/t/chirping-nucleus/82800/24 "2020-02-12T14:08:11Z")
2 posts were split to a new topic: [Nucleus+ Chirping](https://community.roonlabs.com/t/nucleus-chirping/94296) ---
**Author:** ![malla](https://community.roonlabs.com/user_avatar/community.roonlabs.com/malla/32/55186_2.png) [@malla](https://community.roonlabs.com/u/malla)\ **Post date:** [June 8, 2022, 11:00pm UTC](https://community.roonlabs.com/t/chirping-nucleus/82800/25 "2022-06-08T23:00:57Z")
Brand new Nucleus+ here and mine chirps too. I read that the Intel C-States can cause it to do this. Is there a bios setting that can be changed? I really don’t want any form of power saving.