Hi! What’s not quite right with Roon? · None of the above quite fits None of the above quite fits · None of these quite match Tell us what's going on · Been running the QNAP docker image with the production build 1646. Went to update to new production 1653 using my Roon remote and the server updat…

So as others have report in the early access thread, if I recreate the QNAP container station application and specify ROON_INSTALL_BRANCH=earlyaccess and then recreate again with ROON_INSTALL_BRANCH=production; Roon updates without issues from inside the container. The issue seems to be with request…

Hey @DaveHedgehog , Thanks for writing in and for sharing your report! We were able to review a fresh server diagnostic report, and observed the following: Download of RoonServer_linuxx64_206501653.tar.bz2 completes successfully The update script begins extracting to /Roon/app/RoonServer/.update.t…

The Roon/App directory has read/write/execute permissions The docker image isn’t the issue - I am already on 1.0.6 5.10.60-Qnap . The Qnap is a TS-464 which is a current model running Firmware QTS 5.2.9.3451 which is the latest. If this is a problem then all QNAP users are not going to be a abl…

Hello @DaveHedgehog , Just to confirm, you’ve tried to follow this guide when you were updating to the latest Docker RoonServer version? [image] Before you begin - Installing RoonServer on QNAP with Docker This guide explains how to run the official RoonServer Docker image on a QNAP NA…

My apologies if my original post didn’t make it clear. I have been running Stephen’s Docker image since it was released, without issues, using the then Roon production 1646. When I tried to update from 1646 to 1653, yesterday, then I received the error. It looks like others are seeing similar issue…

[image] noris: https://help.roonlabs.com/portal/en/kb/articles/installing-roonserver-on-qnap-with-docker#Before_you_begin I have been running Stephen’s docker image since it was released. So the guide didn’t exist then but I have followed the same steps. The issue is with updating Roon from …

Step 5 in the guide does not work for me because it’s missing what to enter under Advanced Settings.

roon-docker ‘s entrypoint.sh is running TAR with parameters “–no-same-permissions --no-same-owner” to work around this issue , while RoonServer/start.sh doesn’t (yet). ▶ RoonServer/start.sh STDERR output, collected from RoonServer/Logs/RoonServer_log.txt to manually reproduce the issue, i ran these …

Error updating Roon on QNAP Docker from build 1646 to 1653 (ref#8CNKWC)

Support

DDPS April 27, 2026, 9:47pm 4

Yes it has. You must follow the new procedure outlined in several other threads, and on the pinned announcement made recently in these forums.