Network Details (Including networking gear model/manufacturer and if on WiFi/Ethernet)
LAN
Audio Devices (Specify what device you’re using and its connection type - USB/HDMI/etc.)
Fiio M11 connect via UBS to Core Machine
Description Of Issue
When i’m using Tidal via Roon and have the Fiio M11 connect via USB DAC, i don’t get the right information from the sample rate, which means Signal Path, I have the information 352.8k, but on M11 i just have the information 44k
It wasn’t supposed to have the information 352k on Fiio?
The source is 44,1 kHz 24 bits (MQA 352,8 kHz <-- This is the sample frequency of the master file used to generate the MQA file). Roon sends that to your FiiO – no decoding requested in Roon settings for the FiiO it seems (see the picture of your signal path). Generally it is possible that Roon decodes the Stream and preserves the MQA information for the rendering step. The stream would then be 88.2 kHz for your example. See also:
According to the information I found about the firmware of the FiiO, there is no MQA support for your current setup (FiiO used as USB DAC): https://fiio.com/newsinfo/430684.html