# Install guide Audiophonics I-Sabre V3/RaspDAC Power button

**URL:** <https://community.roonlabs.com/t/install-guide-audiophonics-i-sabre-v3-raspdac-power-button/29482>\
**Category:** DietPi\
**Created:** [August 11, 2017, 1:02pm UTC](https://community.roonlabs.com/t/install-guide-audiophonics-i-sabre-v3-raspdac-power-button/29482 "2017-08-11T13:02:39Z")\
**Posts on this page:** 1\
**Page:** 2

<div class="post-metadata">

**Author:** ![FVO](https://community.roonlabs.com/letter_avatar/fvo/32/5_5575768a8748004e209b776fc1b2916d.png) [@FVO](https://community.roonlabs.com/u/FVO)\
**Post date:** [September 3, 2021, 12:56pm UTC](https://community.roonlabs.com/t/install-guide-audiophonics-i-sabre-v3-raspdac-power-button/29482/21 "2021-09-03T12:56:48Z")

</div>

Hi.  
Thanks for the script and sorry to reopen this talk.  
The physical button, blinking LED, start and shutdown are running as they should.

I recently realized my journalctl logs are full of the following entries, each second:

> gpio: Symbol `piModelNames’ has different size in shared object, consider re-linking

I then follow some instructions found here: [https://learn.sparkfun.com/tutorials/raspberry-gpio/c-wiringpi-setup](https://learn.sparkfun.com/tutorials/raspberry-gpio/c-wiringpi-setup) purging and reinstalling wiringpi (but not reinstalling the git version) and it does not help. Above log entries are still flowing in.

Any clue how to resolve this?

For info, I run v.2.60.

> root@DietPi:~# gpio -v  
> gpio version: 2.60  
> Copyright (c) 2012-2018 Gordon Henderson  
> This is free software with ABSOLUTELY NO WARRANTY.  
> For details type: gpio -warranty
> 
> Raspberry Pi Details:  
> Type: Pi 3, Revision: 02, Memory: 1024MB, Maker: Sony
> 
> - Device tree is enabled.  
> \*–\> Raspberry Pi 3 Model B Rev 1.2
> - This Raspberry Pi supports user-level GPIO access.

[Previous page](https://community.roonlabs.com/t/install-guide-audiophonics-i-sabre-v3-raspdac-power-button/29482.md?page=1)
