# Intel NUC 10th gen - what to expect?

**URL:** <https://community.roonlabs.com/t/intel-nuc-10th-gen-what-to-expect/87473>\
**Category:** ROCK\
**Created:** [December 7, 2019, 10:05pm UTC](https://community.roonlabs.com/t/intel-nuc-10th-gen-what-to-expect/87473 "2019-12-07T22:05:27Z")\
**Posts on this page:** 1\
**Showing post:** 116

<div class="post-metadata">

**Author:** ![wklie](https://community.roonlabs.com/user_avatar/community.roonlabs.com/wklie/32/48324_2.png) [@wklie](https://community.roonlabs.com/u/wklie)\
**Post date:** [August 21, 2020, 3:49am UTC](https://community.roonlabs.com/t/intel-nuc-10th-gen-what-to-expect/87473/116 "2020-08-21T03:49:48Z")

</div>

Perhaps you may clarify your needs and continue in this thread:

> [@Bridging network interfaces](https://community.roonlabs.com/t/bridging-network-interfaces/19233/16):
>
> I want to hop in this thread and define a few network terms. A few networking terms are being used incorrectly in this thread. Bonding - This is using 2 or more network interface in parallel to increate bandwidth. If you bond two 1Gb network interfaces you get 2 Gb of speed. Both the host and the your switch must support bonding and be configured for it. So you need a “smart” switch for this to work. Routing - a router routes packets from one network to another. You need different IP ranges on…

---

_[View the full topic](https://community.roonlabs.com/t/intel-nuc-10th-gen-what-to-expect/87473)._