Hi, I’m having issues with my set-up. Basically what happens if I select the microRendu the songs start up for a millisecond, but then jump to the next until the album has been gone through. No sound, it just jumps from one song to the next. It shows the song title and you see the playback info roundel change quickly, but then its on to the next song.
I had an issue with my hard disk connected to my Rock unit, which took me some time to understand, leading to re-installing Rock on the device. After that I had to reinstall ffmpeg, but that all seems to have gone OK and the system works well with the Lumin D2 and the NAD T758.
Below is some code taken from the microRendu which seems to indicate issues, but I don’t understand what. I have reinstalled the software, sequentially rebooted the network, but still the below:
[0000168] 28.849 TRACE alsa output setup: format is pcm 352800/32/2
[0000169] 28.850 TRACE opening [hw:0,0] 352800/32/2
[0000170] 28.850 TRACE prefer larger samples = 0
[0000171] 28.851 TRACE [ALSA] [hw:0,0] using hw pcmformat S32_LE bitspersample 32
[0000172] 28.851 TRACE [ALSA] [hw:0,0] Requesting 2 periods
[0000173] 28.851 TRACE [ALSA] [hw:0,0] Requesting 17640 frames/buffer (8820 frames/period)
[0000174] 28.851 TRACE [ALSA] [hw:0,0] Initialized with 2 periods with 8820 frames/period and 17640 frames/buffer
[0000175] 29.191 ERROR error in snd_pcm_hw_params: Input/output error (-5)
[0000176] 29.191 WARNING [lua@0x12a0ee4] [10.92.94.230:59220] setup failed: RAAT__OUTPUT_PLUGIN_STATUS_FORMAT_NOT_SUPPORTED
[0000177] 29.192 TRACE [lua@0x12a0ee4] [10.92.94.230:59220] SENT [9] {“message”:“RAAT__OUTPUT_PLUGIN_STATUS_FORMAT_NOT_SUPPORTED”,“status”:“UnexpectedError”}
[0000178] 29.366 TRACE [lua@0x12a0ee4] [10.92.94.230:59220] GOT [10] {“request”:“setup”,“format”:{“sample_type”:“pcm”,“sample_rate”:352800,“bits_per_sample”:32,“channels”:2,“sample_subtype”:“none”}}
The Roon diagnostic info identifies the Project perfectly.
Any advise where to look further?
Thanks, Rene