I am having a party at home soon. A friend is a DJ and will do a couple of sessions. I would like to “feed” that as a live radio in Roon so I can “stream” the dj music to my roon zones.
If a local server stream the dj audio, can I add the stream to my live radio in roon? Anyone tried something like that before?
I imagine one possible solution is to set up a streaming server on your LAN send the DJ feed to that and then use the IP address as a Station URL in Roon Live Radio. I’m pretty sure that there would be sync issues between the actual live DJ and the stream due to network latencies, stream encoding etc. Here’s what I found from a cursory search:
Setting Up Music Broadcasting from a LAN URL
To broadcast music over a Local Area Network (LAN) URL, follow these steps:
Required Components
Streaming Server: This will send audio data over your local network.
Streaming Audio Encoder: This software captures and broadcasts audio to the LAN URL.
Steps to Broadcast
Step
Description
1.
Set Up a Streaming Server: Choose a streaming server that can handle audio data. This server will create a LAN URL for your broadcast.
2.
Install a Streaming Audio Encoder: Use software like Rocket Broadcaster or similar to capture audio. This encoder will compress and send the audio to the streaming server.
3.
Configure the Encoder: Set up the encoder to connect to your streaming server. This usually involves entering the LAN URL provided by the server.
4.
Start Broadcasting: Once everything is configured, start the broadcast in your encoder. This will make your audio stream available to other devices on the LAN.
Tips for Successful Broadcasting
Ensure all devices are connected to the same network.
Test the audio quality before going live.
Use a reliable streaming server to minimize interruptions.
By following these steps, you can effectively broadcast music from a LAN URL, allowing other devices on your network to access and enjoy your audio stream.
I am aware of the latencies and sync issues, but it’s not a problem with the way my zones are. The place where the DJ will be is pretty much away from my roon zones and this area will be fed directly from the mixing console.
I assume roon live radios require a HTTP protocol stream.