# Logitech Harmony Remote Control - Solution Found (I think) **URL:** \ **Category:** Roon Software Discussion\ **Created:** [November 5, 2018, 6:34pm UTC](https://community.roonlabs.com/t/logitech-harmony-remote-control-solution-found-i-think/52672 "2018-11-05T18:34:30Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![anon77206263](https://community.roonlabs.com/letter_avatar/anon77206263/32/5_5575768a8748004e209b776fc1b2916d.png) [@anon77206263](https://community.roonlabs.com/u/anon77206263)\ **Post date:** [November 5, 2018, 6:34pm UTC](https://community.roonlabs.com/t/logitech-harmony-remote-control-solution-found-i-think/52672/1 "2018-11-05T18:34:30Z")
If anybody is interested: I purchased an inexpensive product called Flirc (the rev. 2). It works perfectly with Logitech Harmony remotes and may be programmed with a keyboard to store key sequences or single keystrokes that may be programmed into the Harmony remote. It seems this is a perfect solution for my desire to use my Logitech remote with Roon. I just started the Flirc programming but so far everything works perfectly. I can even program the Alt-Tab to switch from Jriver when watching a movie to Roon for music. ---
**Author:** ![anon44636269](https://community.roonlabs.com/letter_avatar/anon44636269/32/5_5575768a8748004e209b776fc1b2916d.png) [@anon44636269](https://community.roonlabs.com/u/anon44636269)\ **Post date:** [November 5, 2018, 6:37pm UTC](https://community.roonlabs.com/t/logitech-harmony-remote-control-solution-found-i-think/52672/2 "2018-11-05T18:37:25Z")
There is a an extension that allows harmony hub/remote to control Roon. ---
**Author:** ![anon77206263](https://community.roonlabs.com/letter_avatar/anon77206263/32/5_5575768a8748004e209b776fc1b2916d.png) [@anon77206263](https://community.roonlabs.com/u/anon77206263)\ **Post date:** [November 5, 2018, 7:40pm UTC](https://community.roonlabs.com/t/logitech-harmony-remote-control-solution-found-i-think/52672/3 "2018-11-05T19:40:56Z")
I’ll look again - It was some time back when I looked at it last but not all commands were supported then and Windows wasn’t quite there yet. All that may be in place now so the solution may be for a problem that did not entirely exist. Story of my life. 🙂 Well at least I can now swap between running computer programs with my Harmony or most anything else that I may want to use in the Windows shortcut list. It makes swapping between JRiver and Roon easier since I don’t need a keyboard to do so. Thanks simon\_arnold ---
**Author:** ![nealsal](https://community.roonlabs.com/user_avatar/community.roonlabs.com/nealsal/32/127260_2.png) [@nealsal](https://community.roonlabs.com/u/nealsal)\ **Post date:** [June 22, 2020, 9:33pm UTC](https://community.roonlabs.com/t/logitech-harmony-remote-control-solution-found-i-think/52672/4 "2020-06-22T21:33:12Z")
Hi, kind of newbie- can you elaborate on ‘an extension that allows harmony hub/remote to control Roon’? Thanks! I have the harmony hub/remote and use a Nucleus as my Core. ---
**Author:** ![Larry\_Post](https://community.roonlabs.com/user_avatar/community.roonlabs.com/larry_post/32/89714_2.png) [@Larry\_Post](https://community.roonlabs.com/u/Larry_Post)\ **Post date:** [June 22, 2020, 11:30pm UTC](https://community.roonlabs.com/t/logitech-harmony-remote-control-solution-found-i-think/52672/5 "2020-06-22T23:30:43Z")
> [@Roon Extension: Deep Harmony - rich feature set for Logitech Harmony](https://community.roonlabs.com/t/roon-extension-deep-harmony-rich-feature-set-for-logitech-harmony/47769): > > This is now updated to V2. Please see posts at and [Obsolete] Hi all, this is the first (beta) of an extension I have been working on for a while for Logitech Harmony. It is currently provided as docker image for Linux that has been tested on a QNAP TS-251+ NAS under container station. Current main Features: Volume step up/down from within Roon controller UI Select/standby activity from within Roon controller UI Transport control of Roon from your Harmony Remote control: Play P… Works great but you’ll need another machine on your network to host the extension. A RPi will do it fine. DietPi includes Extension Manager ready to install via their menu… Easiest way to get started with Extensions is [Extensions Manager](https://community.roonlabs.com/t/roon-extension-manager-v0-11-5/26632). Deep Harmony can be installed via it’s menus with no fuss.