My Roon Nucleus One connects automatically to my Roon Ready Marantz AV10 without HDMI. Is there a disadvantage to this versus using an HDMI. If I used an HDMI cable, what settings would need to change in Roon for the AV10 to recognize the HDMI cable coming from the Nucleus One?

In case you won’t ever want to listen to DSD or multichannel or even both together, connecting your AVR via Ethernet (roonReady) should be just fine and is usually hassle free. But keep in mind almost no AVR supports DSD multichannel via roonReady Ethernet, yours isn’t an exception here. Though, mo…

I could not figure out how to make sure the HDMI port was working for Roon. I unplugged the hdmi port and roon was still playing through ethernet. I am unclear what to do on the AV10 to make it recognize that roon ready should play through the HDMI port rather than ethernet.

You enable the HDMI port in Roon > Settings > Audio and then choose it as Roon’s output zone. Then Roon sends the audio to this zone (and not through the Roon Ready network zone that I suppose you had selected). [image] Audio Setup Basics Accessing Audio Settings To access audio setting…

[image] Not sure where that shows up. This is what is in the roon app

Read the links I posted? You are already in the device setup. That may not be necessary. You need to enable the HDMI device somewhere here: [image] It looks like this in Settings > Audio. There may be several HDMI devices, you probably want HDMI0 on this case: [image] Then switch to this zone …

I have selected the AV10 and Roon plays through the AV10 processor. Why I don’t know how to do is how to configure the output from the Roon Nucleus source to go to HDMI rather than ethernet. I guess I can look at the av10 configuration settings to see if it is controlled there.

[image] Gary_Cardinale: Why I don’t know how to do is how to configure the output from the Roon Nucleus source to go to HDMI rather than ethernet. You choose it in the zone switcher menu like I said, where it will appear after you enabled it in Settings > Audio (just like any other device tha…

I know. It shows up as AV10 and the music will play from the Roon Nucleus through the AV10. What I cannot understand what to do is to direct it through the attached HDMI cable vs playing through ethernet. I don’t have a choice in the zone switcher menu. The choice I have is AV10. Thats it… I w…

The roon ready architecture on the AV10 plays throught the ethernet from the Nucleus and not the hdmi.

[image] Gary_Cardinale: The roon ready architecture on the AV10 plays throught the ethernet from the Nucleus and not the hdmi. Sounds like either you haven’t enabled the correct device or you haven’t chosen it as a zone. When you enable the HDMI device in Settings > Audio, you can give it a …

Marantz AV10 and Roon Setup

Roon Software Discussion

Gary_Cardinale (Gary Cardinale) May 8, 2026, 12:19am 12

Here are some screenshots.

Activating HDMI playback from Nucleus One to Marantz AV10 (ref#HC7TQI)