MQA first unfold in Roon? MQA? [Delivered in 1.5]

Isn’t it three unfolds for MQA?
I’m using a Meridian Explorer 2 in exclusive mode so Tidal doesn’t do the first unfold.

Only way to get above 24bit/48KHz on an iOS device is to go over the USB interface. This is pretty niche if you ask me.

12 posts were split to a new topic: Tidal understands HiRes as MQA. That is problematic

A first unfold that does 2x original sample rate and is the same across the board followed by upsampling with MQA determined filters. The latter is the “rendering” stage and is tailored to the DAC in the sense that the MQA filter definitions will map to specific DAC settings that are DAC chip dependant.

The Dragonfly interprets the MQA filter specification in the PCM stream from the first unfold and translates that into the appropriate ESS upsampling parameters. There is no change whatsoever done to the ESS DAC filters in the MQA firmware update for the Dragonfly.

You are talking about the Dragonfly which is a renderer. Pretty sure the Meridian does all three unfolds. I don’t think the Dragonfly has enough power for the full unfold. In fact doesn’t Tidal do the first unfold with the Dragonfly? It’s turned off in Tidal for the Meridian.

I don’t know where you’re getting the three unfolds from.

I am using Roon to play an album that is in Tidal in MQA but of course my Kef’s can’t play it. But Roon sees it.

That’s just metadata in the file saying literally what you see.

I’ve read a million debates about MQA and a lot of technical documents. I’m not really interested in debating the merits of it here just talking about it and Roon. I’ve already gotten off track enough myself here.

1 Like

My biggest concern with MQA is, that the guys at Roon put their limited resources into MQA instead of (in my opinion) more important things like a good working radio function with an intelligent recommentation system using the whole Tidal catalog showing me new music based on my listening history.


Agree with you. But my impression is all of the technical aspects have been ironed out for a long time. Recall Auralic had MQA decoding fully in their Aries at CES 2016 (Jan 2016!) and MQA Ltd stopped them AT CES from demoing because they realized the impact. Auralic was mega pissed (that is a technical term too). So I think all of these technical issues are indeed solved.

But then if that is correct… What is taking so much time? Are they banking on Bob Stuart to be drunk one day and have him sign the license?

If I were to be realistic, I think they have probably stopped talking about it and it will be what it will be.

Legal negotiations mostly related to the fact that MQA wants money from us regardless of whether our users use MQA or not.


Thats easy to solve, just add an optional MQA fee to Roon, and only enable MQA unfolding for those users who pay for it. Then you send the extra MQA fee to the MQA guys (maybe keep a little yourself as well).

We are all rich audiophiles with Classe amps and Wilson speakers, so who cares about a few extra dollars/year :slight_smile:

1 Like

Oh, at the current rates, we have no problem eating the cost for users that use MQA… but to give them a fee for our entire userbase (even those that don’t use MQA) is just a bad business call for us. Anyway, I’m sure you can appreciate that “simple” solutions are not really a thing in legal negotiations.

One option on the table is a larger extended fee.

What are the options Roon has proposed? Could it be a setting in the DSP config that applies MQA decoding as the first step, and the user count that enables it grants a license payment to MQA? And is this per output device? And is this full decode or first unfold?

I presume Audirvana is paying a license to MQA per software license. Today the multiple output devices with Audirvana is out of the bag as it can stream to a upnp renderer and you can have as many as you want.

We aren’t going to do this publically… I just wanted to set straight that this is truly not a technical issue.

I presume the same, but I do not know for sure. However, Audirvana and Roon are not the same business. We have no plans to stay limited to computer audiophiles forever. Our upcoming Nucleus release, and previous ROCK release is an example of us expanding markets. The “Custom Install” market that we pitched at the CEDIA Expo just weeks ago does not care for MQA even a little bit, but they do want Roon.


I’m just one data point of course.

An additional fee would be fine with me if Roon did the unfolding to 192k, even to a non-MQA DAC - not just a first unfold which Audirvana added for free for their customers (whether they used it or not).

MQA must be laughing all the way to the bank as they sign up software/hardware companies for licensing fees. Once the dust settles we will probably find we have paid a licensing fee for multiple device/software we own. Plus they will be making money from the mastering/production of the music. Where does it stop?


Here is the thing: you Roon guys rock (except Brian who seems like a disco kid), the MQA guys rock…not so much. So when I pay for Roon, I prefer to pay 100% to the “good” guys, with the option to pay the “other” guys if I for some reason like to.

Hmm, and I just bought a full-MQA DAC, oh well!

HAHAHAHAHA… dying here!

So you are all set with MQA… on that device.

Own Audirvana and use TIDAL? You have paid 2x… and own an MQA DAC? Make that 3x.