# MQA General Discussion **URL:** \ **Category:** MQA\ **Created:** [February 22, 2016, 11:21pm UTC](https://community.roonlabs.com/t/mqa-general-discussion/8204 "2016-02-22T23:21:38Z")\ **Posts on this page:** 1\ **Showing post:** 1921
**Author:** ![wklie](https://community.roonlabs.com/user_avatar/community.roonlabs.com/wklie/32/48324_2.png) [@wklie](https://community.roonlabs.com/u/wklie)\ **Post date:** [June 27, 2017, 1:26am UTC](https://community.roonlabs.com/t/mqa-general-discussion/8204/1921 "2017-06-27T01:26:43Z")
While we are discussing ringing, here’s another manufacturer’s opinion regarding Linear vs Minimum phase (which affects the ringing): > **[Home Page](https://www.stereophile.com/?ifaud=true)** > > Stereophile covers everything high-end and audiophile audio. Turntables and music servers, to solid-state and tube amplifiers and preamps, to loudspeakers. > **[Support | Ayre](https://www.ayre.com/support/)** > > We enjoy talking with you and answering your questions about Ayre products. We find that phone conversations are much faster and more efficient at answering your question than typing emails, please feel free to give us a call. Minimum Phase being the default for Roon must also imply something: > [@Roon 1.3 (Build 216) Is Live!](https://community.roonlabs.com/t/roon-1-3-build-216-is-live/24161): > > Hi everyone! A new release of Roon, Roon Server, and Roon Bridge is now rolling out to all platforms. The release includes some new DSP functionality, as well as a number of bug fixes and performance improvements, all of which is detailed below. New DSP Functionality The DSP functionality we are releasing today closes up a lot of loose ends that didn’t quite make it into 1.3, and also addresses some feedback that we’ve received since. Support for DSD512 and 768kHz output for devices that su… It’s also interesting to count the votes for Linear and Minimum phase in this thread: > [@DSP Up-Sampling features in Roon 1.3](https://community.roonlabs.com/t/dsp-up-sampling-features-in-roon-1-3/19293/94): > > AVRs tend to have lower-end SDM-based DACs (and lots of them to support all of those surround channels and extra zones). I would try targeting their highest supported rate first. 44.1 multiples only atm 7th order is empirically more processor intensive than 5th order. It does more arithmetic operations per sample. It’s technically more accurate, and has a lower noise floor. That said, most of the CPU load involved in DSD upsampling is not in the SDM–it’s in the PCM-domain upsampling stage … --- _[View the full topic](https://community.roonlabs.com/t/mqa-general-discussion/8204)._