# Native DSD with Holo Audio May

**URL:** <https://community.roonlabs.com/t/native-dsd-with-holo-audio-may/112140>\
**Category:** Verox \[formerly RoPieee\]\
**Created:** [June 25, 2020, 2:43pm UTC](https://community.roonlabs.com/t/native-dsd-with-holo-audio-may/112140 "2020-06-25T14:43:43Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![GoldenSound](https://community.roonlabs.com/user_avatar/community.roonlabs.com/goldensound/32/132904_2.png) [@GoldenSound](https://community.roonlabs.com/u/GoldenSound)\
**Post date:** [June 25, 2020, 2:43pm UTC](https://community.roonlabs.com/t/native-dsd-with-holo-audio-may/112140/1 "2020-06-25T14:43:43Z")

</div>

I’m currently using RopieeeXL and cannot seem to get native DSD working. Either through roon itself or hqplayer NAA.

Has anyone here got the holo spring 2/may and has native DSD working?

---

<div class="post-metadata">

**Author:** ![spockfish](https://community.roonlabs.com/letter_avatar/spockfish/32/5_5575768a8748004e209b776fc1b2916d.png) [@spockfish](https://community.roonlabs.com/u/spockfish)\
**Post date:** [June 25, 2020, 2:54pm UTC](https://community.roonlabs.com/t/native-dsd-with-holo-audio-may/112140/2 "2020-06-25T14:54:43Z")

</div>

It’s not a user setting or something. It requires 2 parts: first the DAC (USB Firmware/controller) needs to expose ‘the right stuff’, secondly the Linux kernel needs to be able to handle it.

If you send me feedback with the DAC connected I can have a look.

Thanks

---

<div class="post-metadata">

**Author:** ![GoldenSound](https://community.roonlabs.com/user_avatar/community.roonlabs.com/goldensound/32/132904_2.png) [@GoldenSound](https://community.roonlabs.com/u/GoldenSound)\
**Post date:** [June 25, 2020, 3:21pm UTC](https://community.roonlabs.com/t/native-dsd-with-holo-audio-may/112140/3 "2020-06-25T15:21:45Z")

</div>

Heya!

As it turns out, updating the USB firmware on the pi4 seemed to fix it.

Ill send some feedback with it connected to my Pi3 later though.

---

<div class="post-metadata">

**Author:** ![cwichura](https://community.roonlabs.com/letter_avatar/cwichura/32/5_5575768a8748004e209b776fc1b2916d.png) [@cwichura](https://community.roonlabs.com/u/cwichura)\
**Post date:** [June 25, 2020, 4:04pm UTC](https://community.roonlabs.com/t/native-dsd-with-holo-audio-may/112140/4 "2020-06-25T16:04:40Z")

</div>

I have been looking at the May DAC as well, so most curious about Linux recognizing it for native DSD. They brag a lot about their custom USB interface implementation, however, which has me worried that it might need an upstream update.

---

<div class="post-metadata">

**Author:** ![GoldenSound](https://community.roonlabs.com/user_avatar/community.roonlabs.com/goldensound/32/132904_2.png) [@GoldenSound](https://community.roonlabs.com/u/GoldenSound)\
**Post date:** [June 25, 2020, 4:45pm UTC](https://community.roonlabs.com/t/native-dsd-with-holo-audio-may/112140/5 "2020-06-25T16:45:59Z")

</div>

After updating the pi4 usb firmware with ropieeexl, dsd is now working fine on it. So all seems to be good.

If I try 1.536m PCM then it sounds robotic but I’m guessing that’s a result of limited bus bandwidth on the pi. Upto 768khz works without issue. (pcm 1.536m works fine from a Windows machine with drivers installed)

And it is sounding beautiful.

I don’t know what they’ve done with the May’s upgraded USB but it’s clearly doing a damned good job. I literally cannot tell the difference between direct to pc vs using a network streamer. Which is unusual. On every other dac I’ve tried it’s been noticeable at the very least.

Its worth noting that only the L2/L3 versions have the titanis usb module though. L1 has the same USB module as the spring 2.

So good job Jeff zhu on whatever magic you’ve worked there.

---

<div class="post-metadata">

**Author:** ![cwichura](https://community.roonlabs.com/letter_avatar/cwichura/32/5_5575768a8748004e209b776fc1b2916d.png) [@cwichura](https://community.roonlabs.com/u/cwichura)\
**Post date:** [June 25, 2020, 5:39pm UTC](https://community.roonlabs.com/t/native-dsd-with-holo-audio-may/112140/6 "2020-06-25T17:39:35Z")

</div>

> [@GoldenSound](#):
>
> only the L2/L3 versions

Are you using one of these models here? Or the L1 with the different USB interface?

---

<div class="post-metadata">

**Author:** ![GoldenSound](https://community.roonlabs.com/user_avatar/community.roonlabs.com/goldensound/32/132904_2.png) [@GoldenSound](https://community.roonlabs.com/u/GoldenSound)\
**Post date:** [July 3, 2020, 5:30pm UTC](https://community.roonlabs.com/t/native-dsd-with-holo-audio-may/112140/7 "2020-07-03T17:30:24Z")

</div>

I’m using the L2
