Problem with Roon ARC

Roon Core Machine

Windows 10 PC 12 GB RAM

Networking Gear & Setup Details

LINKSYS HOME VELOP ETHERNET

Connected Audio Devices

SMARTPHONE

Number of Tracks in Library

0

Description of Issue

I can’t connect remotely to Roon Core. I can’t use Roon ARC from mobile. I get this error message:
{
“connectivity”: {“status”:“NetworkError”,“status_code”:504,“error”:“error: Error: ETIMEDOUT, response code: undefined, body: undefined connected? undefined”},
“external_ip”: {“actual_external_ip”:“181.aaa.bbb.ccc”,“router_external_ip”:“192.168.100.37”},
“status”: MultipleNatFound
,
“natpmp_autoconfig”: {“status”:“NotFound”},
“upnp_autoconfig”: {“server_ip”:“192.168.1.1”,“found_upnp”:true}
}

Hi Cristian,

Sorry to hear about your troubles in setting up ARC. The error message indicates that you have a redundant layer of network address translation preventing port forwarding.

This can either be at the local-network level (commonly as a result of two routers), or at the level of your service provider (in the form of carrier-grade NAT).

If your setup involves an ISP-provided gateway (modem/router combination) and your own third-party router:

  • In the web administration interface of the ISP-provided gateway (modem/router combination), enable Bridge Mode or equivalent, where the ISP-provided gateway does not have DHCP routing enabled.

  • Alternatively, if you have already created a manual port forwarding rule in your 3rd party router, you can add an additional rule to forward the port through the ISP/second router.

If you only have one router in your setup or your modem is already in Bridge mode, please take a look through our list of known router and internet service provider solutions, as other users may have already encountered the same situation: ISPs and Routers: List of Known Solutions and Workarounds

You can reach out directly to your service provider to ask if they support port forwarding; this question will often enough to prompt them to explain whether or not the carrier-grade NAT they’ve implemented can function with ARC.

More specifically, you can pass along the following questions:

  • Have you implemented carrier-grade NAT for my account level?
  • Have you fully implemented IPv6, or do you have IPv4 addresses available?
  • Can I request a static IPv4 address to support port forwarding?
  • Are there any ports you have reserved at the ISP level I should be aware of?

If you’re unable to locate an existing solution in our #support:port-forwarding-resources subcategory, please reach out to the Roon support team and include the following information:

  1. What is the make and model of your modem and router?
  2. Do you have any additional network hardware, like additional routers or managed switches?
  3. Who is your internet service provider and what is your geographic region?
  4. Is your Modem configured in Bridge Mode so that it operates only as a modem or do you have the ports forwarded on both?
1 Like

Hey @Cristian_Vera-Cruz,

You have my sincerest apologies for the delayed response here, we’ve been dealing with a higher-than-usual volume following our release and we’re working as quickly as we can to get back to everyone.

I wanted to follow up on this thread to see if you were able to get Arc squared away? If not, please fill out the information asked by @Rugby’s question above. Thanks so much!