Roon DSP Crossfeed

John_Fidel · January 3, 2020, 3:59pm

Please provide explanation of the two settings available in the DSP Crossfeed filter. What do they do, what settings create the most effect, what settings create the least.

Thanks

Rugby · January 3, 2020, 4:16pm

Did you review this?

https://kb.roonlabs.com/DSP_Engine

John_Fidel · January 3, 2020, 11:01pm

Thanks for the reply. That link does not explain the two settings available for DSP Crossfeed which are cut frequency and feed level. Please explain what each of these settings do.

Larry_Post · January 3, 2020, 11:17pm

One is the cut frequency and the other is the feed level. The frequency at which the crossfeed is cutoff (not hard but where the slope begins) and the other is how much is fed to both ears in dB of the crossfed frequency range.

Adjust them by ear to suit your preference. You won’t break anything.

If you want to really dig in and learn about it search Google for crossfeed Jan Meier.

John_Fidel · January 3, 2020, 11:47pm

Thanks for the followup