Hi! What’s not quite right with Roon?
· None of the above quite fits
None of the above quite fits
· None of these quite match
Tell us what's going on
· Roon not connecting to my network
Tell us about your home network
· nether Orbi 960
Hello @David_Howell
Our diagnostics show your Nucleus last checked in about a day ago, which matches what you’re seeing. That points to the Nucleus itself either not finishing startup or not getting onto the network, rather than anything in your Roon settings.
Two things would help us narrow this down.
First, please connect a monitor or TV to the Nucleus over HDMI, then power the unit off and back on. The Nucleus shows a status screen on that display as it starts up, including its IP address. Please let us know what appears: the status screen with an IP, an error message, or nothing at all.
Second, please check the network connection physically. Reseat the Ethernet cable at both ends, at the Nucleus and at the Orbi, and try a different cable and a different port if you have them available.
It would also help to know whether the unit is powered at all: is the front light on, and is the chassis warm to the touch?
Once we know what the HDMI output shows, we can tell whether this is a startup problem or a network one, and go from there.