RoPieee is running ... but no cigar

This morning I found one of my RPi3’s with the following screen:

I rebooted a few times, when connected via Ethernet and via WiFi but no change.
The web interface looks normal (v143).
The RoPieee Remote Control extension (v0.8.3) is running.
What could be wrong?
Feedback sent: Logs have been sent to RoPieee HQ with unique identifier ca50ca403aeae667

Reboot. Something was broken by some updates from the distro.
I fixed that and released an update just an hour ago.

Reboot and give it time to update. Takes about 10/15 minutes.

1 Like

Rebooted a few times but no luck.
Will reflash tonight.

Have you gave it time? The update takes about 15 minutes or so.
Can you send me feedback? I’m curious why it won’t update.

Anyways, the new image is out there, so yeah if necessary just reflash.

I gave it all night :slightly_smiling_face: auto reboot at 4 am plus several reboots yesterday evening.
Logs have been sent to RoPieee HQ with unique identifier 6fcdf4120c1e93a2

@spockfish I just noted that my other RPi3 (without display) is also still on v143.
Both RPi3’s are on my company network behind a firewall.
Probably the firewall rules are preventing the update.
I’ll try tonight to reboot while on a different WiFi network that bypasses the firewall.

Yeah. I see what the problem is. Small corruption on the disk which prevents the update to be pulled in.

You need to reflash I’m afraid.