Showing (off) your Roon setup - description and photos [2025]

Maybee fund-raising could help you :slight_smile: :slight_smile: On the other hand, in 6 months time we have 2026 :slight_smile: So you don’t have to wait that long anymore :slight_smile:

Torben

3 Likes

Beautiful equipment in this thread! I’d like to give an update on my setup, as I recently moved from the living room to the attic. So now I have a dedicated listening room at my disposal, which is really great. I can listen to any kind of music without (unwanted) feedback from the family. :grinning_face:

The core of the setup is for stereo listening:

  • Dynaudio Confidence C2 mkII loudspeakers
  • Classé CP-800 mkII stereo preamplifier and DAC
  • Classé CA-2300 stereo power amplifier
  • Marantz SA-11S2 super audio CD player
  • Mac Mini M2 Roon Server
  • Audioquest Niagara 1200 line conditioner
  • Audioquest cables

The multi-channel part of the setup is still in build-up phase, as I have positioned the speakers, but did not get a chance to connect them yet. This part of the setup contains:

  • Classé SSP-800 multi-channel processor
  • Classé CA-5300 5-channel power amplifier (side, back and center speakers)
  • Oppo BDP-93EU blu-ray player
  • Philips 55" OLED TV

This is a picture of the room in its current state:

Kind regards,
Richard

41 Likes




All that LINN talk recently inspired me to show my system.
Speakers/Streamer/Preamp System:
LINN Selekt DSM Edition Hub (2x Organik DAC + 2x Power Cartridge + LINN Exakt/Aktiv Digital Crossover System) + Stack Audio Auva EQ + Entreq Minimus Ground box + Siltech Ruby Mountain II Power cable

LINN 119s + Kanto SX30 Speaker Stands + Stack Audio Auva 70 + AQ Rocket 88 Bi-Amp Cable

LINN Exaktbox sub + AQ Husky Subwoofer cable

REL S510 Sub (mono)

Turntable Source: Clearaudio Performance DC + Satisfy Kardan + Hana ML + HRS Isolation Platform + Clearaudio Batt PS + Clearaudio Balance V2 Phono Preamp

CD Source: Pro-Jec CD Box RS2T CD Transport + LTA LPS+

Digital/Ethernet Conditioning: Silent Angel Bonn N16 LPS Network Switch + Uptone Audio EtherREGEN Switch + AfterDark. Project ClayX Black Modernize Thermo Kit for UpTone EtherREGEN + AfterDark. 75 Ohm Low Pass Filter + Entreq Micro Ground box + AfterDark. Project ClayX GIESEMANN OCXO 10MHz Reference Master Clock (Audiophilestyle Edition - 75 Ohm/Emperor Double Crown) + AfterDark. Black Modernize Linear Power Supply - High Current Isolated Transformer SE Edition

Power Conditioning: Saturn Audio 103C Mk1 Power Filter + AQ Monsoon Power Cable

Roon Server: Roon (ROCK) NUC (8i5BEK/4TB) + Akasa Fanless case + AfterDark. Black Modernize Linear Power Supply (ROON NUC Music Server SE Edition)

Room: Size 3.5m x 5.5m x 2.5m + Listening position = 3.2 from front (behind speakers) wall + Wood slats front (behind speakers) wall

Software: Roon Lifer + Qobuz + Apple Music/Classical through Airplay + LINN’s Space Optimization+

31 Likes

Very tasty lineup there!.

My own setup is very simple …
Linn Klimax DS/3 with Organik/ Utopik.

Via Qobuz/Roon the end result is very good.

My trusty late eighties LP12 does all the analog work.

2 Likes

roon core mac mini 2024 > douk u2 usb to optical convertor > chord mscaler > wave stream bnc cables >chord tt2 > audiophysic spark 6 standmount speakers > JL Audio D110 Dominion subwoofer. (my chord tt2 is powering the speakers directly here for maximum transparency) (belden vintage cables for interconnects) (tt2 by xlr to sub)

14 Likes

closer look at the audiophysic spark 6 with front glass grilles attached.

14 Likes

Thanks. I do like simple setups. What speakers do you use?

Hi Dean, as a long time Linn owner i have had two pairs of Linn speakers ;Keilidhs and Kabers.
After those i discovered Totem Audio speakers from Canada at a hifi show many years ago.
First set of Totem Forests were great for a few years,then i walked into Loud n Clear Glasgow and saw the Forest Signature version.
Traded in my old Forests and have been very happy with the updated versions.
My pre is German the Bonnec Timpano and my amp is a Linn Akurate C4200 / Dynamik.
I have Chord Epic Supertwin speaker cable and bi-wire/amp them as they are biwireable cabinets.
My LP12 has the Ekos2 arm /Dynavector XX2 MK2.
Pre is a Linn Linto.
Recently upgraded the bearing to the Karousel replacing the older Cirkus.
Power is via a Linn Lingo 4.
A bog standard setup from Linn!.
I live in Waterfoot village outside Glasgow where Linn HQ is situated and have had a few guided tours over the years.

'81 klipsch heresy back in the system after replacing the (worn out) original midrange drivers … they sound great now :slight_smile:

19 Likes

As a Canadian, glad to see the Totems. They are great.

2 Likes

New solidsteel S3-4 rack :slight_smile:


25 Likes

Congrats! The living room must feel really empty :thinking:

2 Likes

Hahaha, yes. But luckily we have a second living room downstairs now.

19 Likes

Best performance per pound upgrade: bass traps / diffusers. Even though the location is not ideal, the effect is still remarkable. I would rather they were lower down but this is a shared space so everything is a compromise, and I wanted them for bass performance more than imaging. Now the bottom octaves can keep up with the mids and there is no chestiness on, for example, Radio 4 presenters.

33 Likes

some dark there :slight_smile: what for loudspeaker you using in your nice setup?

Nice setup there
Are they from GIK acoustics and are they just hooked on the wall? Asking for a friend :wink:

1 Like

Yes they are from GIK, the Impression Series. They come with wall mounting kit using French Cleats.

1 Like

Thanks for confirming that. The wife signed off on some a while ago but I didn’t pull the trigger. They would look great behind my Spendor D7.2 and would probably mean I could turn off the Room DSP to drop the low bass a bit, which helps at higher volumes.

Looking at their absorption spectrum, they don’t really seem effective at low bass, as I would’ve expected by their thickness.

For reference, see picture from diyaudioheaven

4 Likes

Certainly it takes the edge off. As you can see from the attached I have a uniquely bizarre listening space where the only parallel walls are floor and ceiling:

It helps in some ways but there are some strange resonances!

2 Likes