Stable release 2018/11/06 (219)

Phil_Kemp · November 13, 2018, 3:58pm

Welcome to RoPieee

 Website: https://ropieee.org
   Forum: https://community.roonlabs.com/c/audio-products/ropieee

Keep in mind that SSH access is not officially supported and might disappear in the future.

Have fun!
Last login: Thu Jul 5 12:53:20 2018 from 192.168.2.132
[root@ropieee ~]# cd /opt/Ropiee/sbin
-bash: cd: /opt/Ropiee/sbin: No such file or directory
[root@ropieee ~]# cd /opt/Ropieee
-bash: cd: /opt/Ropieee: No such file or directory
[root@ropieee ~]# cd /opt/RoPieee
[root@ropieee RoPieee]# ls
conf config.d lib log remotectl sbin ssh_keys touch webpage
[root@ropieee RoPieee]# cd sbin
[root@ropieee sbin]# ls
configure ping-analytics reboot run-updates send-feedback send-remote-control
[root@ropieee sbin]# ./send-remote-control playpause
send-remote-control INFO trying to run command: playpause
send-remote-control INFO found regular ZONE = {“id”:“16017a9d1f165d465c3854f8d6b0c599bfcc”,“name”:“geekout”}
send-remote-control INFO found zone geekout with ID: 16017a9d1f165d465c3854f8d6b0c599bfcc
send-remote-control INFO cmd = {“command”:“playpause”,“zone_id”:“16017a9d1f165d465c3854f8d6b0c599bfcc”}
[root@ropieee sbin]# ./send-remote-control playpause
send-remote-control INFO trying to run command: playpause
send-remote-control INFO found regular ZONE = {“id”:“16017a9d1f165d465c3854f8d6b0c599bfcc”,“name”:“geekout”}
send-remote-control INFO found zone geekout with ID: 16017a9d1f165d465c3854f8d6b0c599bfcc
send-remote-control INFO cmd = {“command”:“playpause”,“zone_id”:“16017a9d1f165d465c3854f8d6b0c599bfcc”}
[root@ropieee sbin]# irw
a4 0 KEY_PLAYPAUSE /dev/input/event0
a4 0 KEY_PLAYPAUSE /dev/input/event0
^C
[root@ropieee sbin]# systemctl status irexec
Warning: The unit file, source configuration file or drop-ins of irexec.service changed on disk. Run 'systemctl daemon-rel>* irexec.service - Handle events from IR remotes decoded by lircd(8)
Loaded: loaded (/usr/lib/systemd/system/irexec.service; enabled; vendor preset: disabled)
Drop-In: /etc/systemd/system/irexec.service.d
-ropieee-irexec-override.conf Active: active (running) since Thu 2018-07-05 12:46:43 PDT; 42min ago Docs: man:irexec(1) http://lirc.org/html/configure.html http://lirc.org/html/configure.html#lircrc_format Main PID: 253 (irexec) Tasks: 1 (limit: 2220) CGroup: /system.slice/irexec.service-253 /usr/bin/irexec -D debug /etc/lirc/irexec.lircrc

Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.
lines 1-15/15 (END)…skipping…
Warning: The unit file, source configuration file or drop-ins of irexec.service changed on disk. Run 'systemctl daemon-rel>* irexec.service - Handle events from IR remotes decoded by lircd(8)
Loaded: loaded (/usr/lib/systemd/system/irexec.service; enabled; vendor preset: disabled)
Drop-In: /etc/systemd/system/irexec.service.d
-ropieee-irexec-override.conf Active: active (running) since Thu 2018-07-05 12:46:43 PDT; 42min ago Docs: man:irexec(1) http://lirc.org/html/configure.html http://lirc.org/html/configure.html#lircrc_format Main PID: 253 (irexec) Tasks: 1 (limit: 2220) CGroup: /system.slice/irexec.service-253 /usr/bin/irexec -D debug /etc/lirc/irexec.lircrc

Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.
~
~
~
~
~
~
~
lines 1-15/15 (END)…skipping…
Warning: The unit file, source configuration file or drop-ins of irexec.service changed on disk. Run 'systemctl daemon-rel>* irexec.service - Handle events from IR remotes decoded by lircd(8)
Loaded: loaded (/usr/lib/systemd/system/irexec.service; enabled; vendor preset: disabled)
Drop-In: /etc/systemd/system/irexec.service.d
-ropieee-irexec-override.conf Active: active (running) since Thu 2018-07-05 12:46:43 PDT; 42min ago Docs: man:irexec(1) http://lirc.org/html/configure.html http://lirc.org/html/configure.html#lircrc_format Main PID: 253 (irexec) Tasks: 1 (limit: 2220) CGroup: /system.slice/irexec.service-253 /usr/bin/irexec -D debug /etc/lirc/irexec.lircrc

Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.
~
~
~
~
~
~
~
~
~
[root@ropieee sbin]# systemctl status irexec
Warning: The unit file, source configuration file or drop-ins of irexec.service changed on disk. Run 'systemctl daemon-rel>* irexec.service - Handle events from IR remotes decoded by lircd(8)
Loaded: loaded (/usr/lib/systemd/system/irexec.service; enabled; vendor preset: disabled)
Drop-In: /etc/systemd/system/irexec.service.d
-ropieee-irexec-override.conf Active: active (running) since Thu 2018-07-05 12:46:43 PDT; 44min ago Docs: man:irexec(1) http://lirc.org/html/configure.html http://lirc.org/html/configure.html#lircrc_format Main PID: 253 (irexec) Tasks: 1 (limit: 2220) CGroup: /system.slice/irexec.service-253 /usr/bin/irexec -D debug /etc/lirc/irexec.lircrc

Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.
[root@ropieee sbin]# systemctl daemon-reload irexec
Too many arguments.
[root@ropieee sbin]# systemctl daemon-reload
[root@ropieee sbin]# ./send-remote-control playpause
send-remote-control INFO trying to run command: playpause
send-remote-control INFO found regular ZONE = {“id”:“16017a9d1f165d465c3854f8d6b0c599bfcc”,“name”:“geekout”}
send-remote-control INFO found zone geekout with ID: 16017a9d1f165d465c3854f8d6b0c599bfcc
send-remote-control INFO cmd = {“command”:“playpause”,“zone_id”:“16017a9d1f165d465c3854f8d6b0c599bfcc”}
[root@ropieee sbin]#

Done. No change on remote…
Feedback afb9e53226434307

wizardofoz · November 13, 2018, 3:59pm

Harry the screen froze again after one track…I’m playing to several zones tho so wonder if that could be an issue. Primary zone is the XMC one. And its happened again just now stuck on the first track it was playing when it came back after a restart

spockfish · November 13, 2018, 5:55pm

This is frustrating…

But ok. So for some reason the separate parts work, but not the complete solution.
Can you reboot first?

Then login, run the following command, and hit the play pause button a few times.

journalctl -f -u irexec

Phil_Kemp · November 13, 2018, 7:20pm

Done. Same bevahvior. Feedback e20dbf884752d2b8

spockfish · November 13, 2018, 8:02pm

But do you have the output of command mentioned?

Phil_Kemp · November 13, 2018, 11:03pm

Oops sorry…
Here you go…
Welcome to RoPieee

 Website: https://ropieee.org
   Forum: https://community.roonlabs.com/c/audio-products/ropieee

Keep in mind that SSH access is not officially supported and might disappear in the future.

Have fun!
Last login: Thu Jul 5 13:06:36 2018 from 192.168.2.132
[root@ropieee ~]# journalctl -f -u irexec
– Logs begin at Thu 2018-07-05 16:39:16 PDT. –

No response if I press keys…
Cheers
Phil
Feedback f391c7b141dbbd32

Phil_Kemp · November 14, 2018, 12:33am

I’m on a 3B+ would that make a difference?

Phil

spockfish · November 14, 2018, 7:13am

Nope. And the remote control is working, the command that goes up higher in the chain is working, but the sum of this alll isn’t. Let’s do some checks:

ls -al /etc/lirc/irexec.lircrc
cat /etc/lirc/irexec.lircrc
systemctl status irexec

Phil_Kemp · November 14, 2018, 9:38am

Here ya go…
Welcome to RoPieee

 Website: https://ropieee.org
   Forum: https://community.roonlabs.com/c/audio-products/ropieee

Keep in mind that SSH access is not officially supported and might disappear in the future.

Have fun!
[root@ropieee ~]# ls -al /etc/lirc/irexec.lircrc
-rw-r–r-- 1 root root 1124 Aug 7 2018 /etc/lirc/irexec.lircrc
[root@ropieee ~]# cat /etc/lirc/irexec.lircrc

Initial test configuration for systemwide irexec service.

Note that the system-wide service is useful only in corner-cases.

Most scenarios are better off with a session service as described in the

Configuration Guide. However, note that both can also be combined.

Also note that the system-wide service runs without a terminal. To

check the output generated use something like

‘journalctl -b0 /usr/bin/irexec’. This service just echoes some keys

commonly available.

begin
prog = irexec
button = KEY_RED
config = echo “KEY_RED”
end

begin
prog = irexec
button = KEY_BLUE
config = echo “KEY_BLUE”
end

begin
prog = irexec
button = KEY_1
config = echo “KEY_1”
end

begin
prog = irexec
button = KEY_2
config = echo “KEY_2”
end

begin
prog = irexec
button = KEY_3
config = echo “KEY_3”
end

begin
prog = irexec
button = KEY_OK
config = echo “KEY_OK”
end

begin
prog = irexec
button = KEY_LEFT
config = echo “KEY_LEFT”
end

begin
prog = irexec
button = KEY_RIGHT
config = echo “KEY_RIGHT”
end
[root@ropieee ~]# end
-bash: end: command not found
[root@ropieee ~]#
[root@ropieee ~]# end
-bash: end: command not found
[root@ropieee ~]#
[root@ropieee ~]# systemctl status irexec
Warning: The unit file, source configuration file or drop-ins of irexec.service changed on disk. Run ‘systemctl daemon-reload’ to r>

irexec.service - Handle events from IR remotes decoded by lircd(8)
Loaded: loaded (/usr/lib/systemd/system/irexec.service; enabled; vendor preset: disabled)
Drop-In: /etc/systemd/system/irexec.service.d
-ropieee-irexec-override.conf Active: active (running) since Thu 2018-07-05 12:46:43 PDT; 4h 51min ago Docs: man:irexec(1) http://lirc.org/html/configure.html http://lirc.org/html/configure.html#lircrc_format Main PID: 260 (irexec) Tasks: 1 (limit: 2220) CGroup: /system.slice/irexec.service-260 /usr/bin/irexec -D debug /etc/lirc/irexec.lircrc

Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.
[root@ropieee ~]#

hope that helps
feedback 7c55764f0a1e110a

Phil

spockfish · November 14, 2018, 9:57am

Bingo!

There you have it. That’s not right. But it at least explains things

Can you do the following:

yes | pacman -Syu lirc-ropieee
systemctl restart irexec
cat /etc/lirc/irexec.lircrc

Phil_Kemp · November 14, 2018, 1:33pm

Bingo is right! Now it’s working great!

Thanks for all your help!

Phil…

spockfish · November 14, 2018, 1:51pm

Nice!

Ok, thank you for your patience

Enjoy!

Phil_Kemp · November 16, 2018, 1:29am

You’re most welcome! thanks for your tenacity!

Phil

wizardofoz · November 16, 2018, 4:09am

@spockfish since I removed the USB DAC from one display and am using another ropieee zone with IQAudIO DAC PRO hat, despite all the correct zone info etc, restarts and re auth of the extn I am still only getting the first maybe 30 secs or so of display updates then its frozen with the same data until I restart the display rip unit or restart the extn in the web GUI… maybe you green something from this…its running on a rpi supplied power brick

feedback 841b1e0a0bccc8cf

spockfish · November 16, 2018, 8:26am

Can’t read the archive.

This is weird, because this is the second time this happens with an archive coming from you.
This suggests that the SD card is screwed, but I’m wondering why.

wizardofoz · November 16, 2018, 9:41am

Might swap it out then I guess…have some spare cards so not to hard aside from taking it all apart

wizardofoz · November 16, 2018, 2:30pm

@spockfish Ok trying another RPi setup and its the same thing… display shows up but track just sits there with the title scrolling (if needed) but play stuck at the position it was when it connected. 71e05b678243f984

Update OK same thing different SD card reflagged it latest build and Roon is B360 another feedback here d269977675a92c87

spockfish · November 17, 2018, 12:53pm

First one I can’t read (again).

The second I can. I think you hit the bug in Roon Core. Can you reboot your core for me?

Phil_Kemp · November 18, 2018, 6:01am

Harry, for reason it just stopped working…
I checked the irw and it is working. I also checked the commands and they don’t work any more.

Feedback 1f7442d8f7074d48

Any thoughts?
Phil

Phil_Kemp · November 18, 2018, 6:10am

I think I figured it out… I have zones grouped and it seems you can’t pause/skip a grouped zone…

Has it always been that way?

Phil