Troubleshooting Roon Rock Installation on NUC 14 (ref#NHUN6W)

What’s happening?

· Something else

How can we help?

· None of the above

Other options

· My Roon software won't start up

Describe the issue

Roon rock doesn't work on NUC 14

Describe your network setup

LHY SW6 with clock

Not sure if you are aware but this NUC model isn’t on the compatibility list, so it’s not guaranteed to work:

But maybe it helps if you describe exactly what’s happening

When installing roon rock, stop at Welcome to Grub.

So, I installed it on ssd with NUC 7 and make sure it works well

I moved ssd back to NUC14

welcome to grub!
now booting a, attempt 0.

or

now booting B, attempt 1.

It stops like this.

I want to experience fast DSD256 upsampling in roon rock

So I changed from NUC7 to NUC14.

But I was frustrated.

Hey @JUUN_PARK,

Thanks for writing in! I’m sorry to say that @Suedkiez is correct in this case, unfortunately - we can’t yet fully support NUC14.

That said, there’s a chance you could get some additional help from others in the community over in the Tinkering category - I’ll move your thread here in hopes of finding a solution.

One area that may be worth troubleshooting, if we were to take a stab at guessing - would be the BIOS settings on the machine. Perhaps it’s running in legacy mode when unintended, or UEFI isn’t enabled.

Until our team has more time to test things thoroughly, we’re unfortunately unable to provide any additional insight. You have my apologies again on this!

NUC14 does not support legacy but only UEFI.

and I tested it with all bios including the latest BIOS.

I will look forward to the day when Roon ROCK properly supports the METEOR LAKE.

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.