Unable to connect Roon to Naim Uniti Atom after macOS 27 update (ref#EO1TMO)

Hi! What’s not quite right with Roon?

· None of the above quite fits

None of the above quite fits

· None of these quite match

Tell us what's going on

· Yesterday, I updated my Mac to macOS 27, and since then I have been unable to connect Roon to my usual listening device, a Naim Uniti Atom Headphone Edition.

I contacted Apple Support, and they checked my Mac and confirmed that everything is working correctly. They advised me to contact you so that you can help me find a solution to this problem.

Thank you very much.

Tell us about your home network

· Marca: Askey
* Modelo: RTF3505VW

This has been a thing since Sequoia after macOS updates (and sometimes Roon updates) see the instructions in the pinned post:

Hey @alcasmar76,

Thanks for writing in! Sorry to hear about your issues, @Suedkiez is 100% correct here. See if the following helps:

  1. Open macOS System Settings → Privacy & Security → Local Network
  2. Make sure Roon and Roon Server are both enabled
  3. Even if they are already enabled, please toggle them off and back on
  4. Fully quit Roon Server from the macOS menu bar / task bar
  5. Reboot your Mac
  6. After reboot, launch Roon again and check if the devices is avaliable again.

Once these permissions are refreshed and the system restarted, your audio devices should reappear.

Please let us know if the issue persists after these steps, and we’ll continue from there.

Hi,

I followed your instructions:

  • Roon is enabled under macOS → Privacy & Security → Local Network.

  • I toggled the permission off and back on.

  • I completely quit Roon and restarted the Mac.

  • Roon and Roon Server are fully up to date.

  • The Naim Uniti Atom Headphone Edition still does not appear in Roon → Settings → Audio.

I also checked RAAT discovery from Terminal:

dns-sd -B _raat._tcp

The only result is:

Browsing for _raat._tcp
STARTING...

No RAAT devices are discovered.

I also tested direct connectivity to the Naim at 192.168.1.33:

nc -vz 192.168.1.33 9003

The result was:

connectx to 192.168.1.33 port 9003 (tcp) failed: Connection refused

So the Mac can reach the Naim’s IP address, but the connection to port 9003 is refused.

The issue started immediately after upgrading to macOS 27.

Please let me know what you recommend as the next step.

Hello @alcasmar76

If Roon Server runs on a Mac and your endpoints disappeared after updating to macOS 27, this is why, and here is what to do while we work on it.

macOS 27 blocks Roon Server from making outgoing connections to other devices on your network. The block happens inside the system’s network stack, before anything leaves the Mac, so Roon reports it as “No route to host”. Incoming connections are unaffected, which is why Roon itself still runs and your remotes still connect while your speakers and streamers vanish.

Toggling the Local Network permission does not clear this, and neither does reinstalling Roon. That is not you doing something wrong. There is currently no way to reset this state on macOS at all, which Apple have acknowledged.

Step 1: find your network address

Open Terminal. You will find it in Applications > Utilities, or press Command and Space and type Terminal.

Paste this and press Return. It only reads, it changes nothing:

ifconfig | grep "inet " | grep -v 127.0.0.1

You will see one or more lines like this:

inet 192.168.1.42 netmask 0xffffff00 broadcast 192.168.1.255

Take the address after inet, replace the last number with 0, and add /24. So 192.168.1.42 becomes 192.168.1.0/24. If yours reads 10.0.0.37, it becomes 10.0.0.0/24.

If your line shows a netmask other than 0xffffff00, please post the output here instead and we will give you the right value. That is uncommon on a home network.

Step 2: apply it

Paste both blocks below into Terminal, one at a time, pressing Return after each. Replace 192.168.1.0/24 with your own value from step 1, and leave 224.0.0.0/4 exactly as it is. Terminal will ask for your Mac password. Nothing appears as you type it, which is normal.

sudo defaults write com.apple.network.local-network AllowedEthernetLocalNetworkAddresses -array "192.168.1.0/24" "224.0.0.0/4"
sudo defaults write com.apple.network.local-network AllowedWiFiLocalNetworkAddresses -array "192.168.1.0/24" "224.0.0.0/4"

Run both even if you only use Wi-Fi, or only Ethernet. They are separate settings and the unused one does no harm.

The 224.0.0.0/4 entry is not optional if you use Roon ARC. macOS treats multicast as local network traffic whatever else you exempt, and without it ARC cannot set up its connection.

Step 3: restart the Mac

Nothing changes until you do. After the restart, open Roon and go to Settings > Audio. Your devices should be listed again.

To check it applied

defaults read com.apple.network.local-network

No password needed, changes nothing. You should see both lists with your network and 224.0.0.0/4 in them.

What this trades, and how to undo it

This tells macOS to stop treating your network as a local network for every app on that Mac, not only Roon. It is the mechanism Apple provides for exactly this situation, but it is broader than Roon, and worth knowing before you run it.

To remove it later:

sudo defaults delete com.apple.network.local-network AllowedEthernetLocalNetworkAddresses
sudo defaults delete com.apple.network.local-network AllowedWiFiLocalNetworkAddresses

Then restart the Mac again.

This is a workaround, not a fix. R&D is working on the underlying cause. We do not have a timeframe.

Hi @alcasmar76,

Just to keep you appraised of the situation:

First, the workaround steps @vadim shared above are now listed more clearly and conveniently in this article. As an FYI, you can access the Terminal app on macOS in the Applications → Utilities folder.

Secondly, this workaround is obviously tedious and technical and not a long-term solution for what’s meant to be plug-and-play functionality. We wanted to assure you that the team is working diligently to restore clean device discovery on startup for users who have updated to Golden Gate.

We’re making progress and will share announcements broadly in the banner update we have on Roon Community in the support section.

Thank you again for your patience.