· Purchased used Titan from previous owner who did not reset prior to sending. I have connected the Titan to my router via Ethernet but my network is unable to connect to (or even detect) the Titan. Therefore I am unable to access the web administration interface for the Titan t reset it myself.
Hello - I tried exactly what you described last Saturday with no success. I tried it again just now and it is still not working, When I type in resetnetwork I get the following notification message on the screen: ‘resetnetwork’ is not recognized as an internal or external command operable program, or script file.
AceRimmer
("I’m not just a hero; I’m a legend!")
4
Are you sure you have the keyboard and monitor connected directly to the Titan and nothing else?
Because that exact message is a Windows Command Prompt.
Which I would expect if you were connected to a Windows PC
Yes, i’m sure. I have tried this at least six times at this point.
AceRimmer
("I’m not just a hero; I’m a legend!")
7
That just makes no sense unfortunately as the only way I can see you getting that exact message would be if the Titan was now running a version of Windows instead of the Roon OS it was initially shipped with as new.
I’m baffled.
While awaiting any further suggestions from the community or Roon Support you might want to reach out to the person you bought it from for some possible enlightenment.
One more question - According to research I have done online, as the previous owner did not reset it prior to shipping it to me - the issue may be that my network is unable to discover or connect to the Titan because the previous owner’s network configuration remains in the unit … effectively locking its access to only the previous owner. The seller is located in Ontario, Canada and I am in Los Angeles, California. I’m not very tech savvy but - if the issue is that the unit is still locked to the previous owner’s network configuration - could there be a way for him to connect remotely to my network and reset the unit himself? Or could I ship the unit to a Roon service center here in the US to have it reset there and returned to me?
AceRimmer
("I’m not just a hero; I’m a legend!")
10
Hopefully a member of Support will chime in tomorrow.
Yes that’s possible, but would normally be resolved by the “resetnetwork” on the boot screen, if the device was running the RoonOS it originally shipped with.
But you seem to get a different one:
Please make a photo, and post it here, of what you see on the screen when you follow the above instructions up to this point:
Thanks for the screenshot and the clarification. When the unit was booting, did you press Escape to skip the startup script? If you reboot the unit and let it boot fully, do you see a different screen?
The reset command should be made in another diagnostic screen, but if the previous owner removed the database SSD it may not reach that point. Let us know the above, and we can proceed from there.
I tried both ways - I hit Escape to skip the start up script but nothing changed on the screen. I also have powered on the Titan and not touched the keyboard and left it that way for hours… again screen stays as in the photo - I never get to another diagnostic screen. How long should the reboot take before it displays the diagnostic screen?
I opened my unit and lightly tightened the screw on the M.2 SSD and presto! I was able to get to the Roon diagnostic screen and resetnetwork per instructions.
Titan is now visible on my network and I can proceed with migrating from my old Roon Nucleus!
Something must have shaken loose in transit. Cannot thank you enough!!!
Now I just need to find some good instructions on how to migrate my account, libraries, etc to the Titan