USB-SFP Network Connection Fails After ROCK OS Update (ref#R9K39S)

Hi! What’s not quite right with Roon?

· None of the above quite fits

None of the above quite fits

· None of these quite match

Tell us what's going on

· Subject: USB-SFP Network Connection No Longer Working After ROCK OS Update

Dear Roon Support Team,

I am using Roon ROCK.

Until recently, I had been connecting ROCK to my network via SFP using a USB-SFP converter, rather than using a conventional RJ45 Ethernet connection.

However, after installing the latest ROCK OS update, network communication via the USB-SFP converter stopped working.

When I switch to an RJ45 connection, I can communicate with ROCK without any problems.

I really like the sound quality I get when using the USB-SFP connection, and I would prefer not to change my existing setup.

I would therefore like to revert to the previous version of ROCK OS. Alternatively, if this issue can be resolved through an OS update, I would appreciate it if you could provide a fix.

Thank you for your assistance.

Best regards,

Tell us about your home network

· The USB-SFP converter is a Chinese-made unit with the model number LMK-TCF1000. Unfortunately, I don't know the brand name.

A quick search suggests that this device only supports Linux kernels up to 5.17, which was released four years ago.

I don’t know what Roon OS uses, but up-to-date Linux uses 7.x.

Hi @Shigeharu_Kawauchi.

Thanks for letting us know about the USB-SFP connection after the ROCK OS update. We’ve enabled and the team is reviewing the diagnostics from your ROCK.

If you’d like to roll back to the previous RoonOS version, please follow the instructions here:

Let us know how that goes.

Thank you for your response.

I have read the RoonOS Recovery instructions, but I would like to clarify one point.

Does this recovery procedure actually allow me to roll back to the previous version of RoonOS, or does it simply reinstall or repair the current version?

My ROCK is currently booting and working normally via the RJ45 Ethernet connection. The only problem is that the USB-SFP network connection stopped working after the update.

I would prefer to restore the previous RoonOS version without losing my existing settings or database.

Could you please clarify the correct procedure for doing this?

Thank you for your help.

Hello,

I am following up on my previous message, as I have not yet received a response.

I would appreciate clarification on the following points:

  1. Does the RoonOS Recovery procedure allow me to downgrade to the previous RoonOS version, or does it only reinstall or repair the current version?

  2. If downgrading is possible, can it be done without losing my existing database and settings?

  3. Since the USB-SFP converter is currently disconnected, do you need me to reconnect it to reproduce the issue and collect additional diagnostic information?

I would also appreciate an update on the technical team’s investigation into why the USB-SFP connection stopped working after the ROCK OS update.

I would really like to continue using my USB-SFP connection, which worked perfectly before the update.

Thank you for your assistance. I look forward to hearing from you.

Hey @Shigeharu_Kawauchi,

Thank you for the logs. Before we go further, we’d like to confirm one thing. The diagnostics we received come from two different machines: one with an Intel Core i5‑9400 running RoonOS 2.1, and one with an Intel Core i7‑13700K running RoonOS 3.0. Do you have two ROCK machines? If so, which one do you use with the USB‑SFP adapter?

Once we know that, please connect the USB‑SFP adapter to that machine, leave the RJ45 cable connected too, and reboot it. Let it run for about 10 minutes, then reply here with the time you rebooted. We’ll collect fresh diagnostics from it.

Until we’ve looked at those logs, please don’t roll back RoonOS.

Hi Benjamin,

Yes, I have two ROCK machines, which I use at different locations and switch between depending on where I am.

  • Intel Core i5-9400 running RoonOS 2.1

  • Intel Core i7-13700K running RoonOS 3.0

The USB-SFP issue occurred on the i7-13700K machine running RoonOS 3.0. This is the machine I was using with the USB-SFP adapter.

As requested, I connected the USB-SFP adapter and kept the RJ45 cable connected as well. I then rebooted the ROCK.

The reboot was initiated at 9:47 AM JST on November 10, 2026, and I was able to access the ROCK again at 9:51 AM JST.

The ROCK has been running for approximately 10 minutes since the reboot.

Please collect the diagnostic information.

Thank you.

Hey @Shigeharu_Kawauchi,

Thanks for confirming which machine has the problem and for rebooting it with both connections plugged in. Unfortunately, we weren’t able to collect diagnostics from the i7‑13700K after that reboot. To get around this, we’d like to ask you to send the logs to us directly.

  1. Leave the USB‑SFP adapter and the RJ45 cable both connected to the i7‑13700K. Reboot it once more and let it run for about 10 minutes.
  2. From a computer on the same network, open the ROCK’s Data share: \ROCK\Data on Windows or smb://ROCK/Data on Mac. If you’ve renamed the ROCK, use its name or IP address instead. On RoonOS 3.0, sign in with Guest as both the username and password.
  3. Open the RoonServer folder and zip the whole Logs folder inside it. Put your Community username in the zip file’s name.
  4. Upload the zip by following the steps in our Accessing Roon Logs guide, then reply here so we know it’s there.

Also, since you switch between two ROCK machines on one account, please make sure the i5‑9400 is powered off while you do this. Only one Roon Server can be active per subscription at a time. If Roon asks you to unauthorize the other session when you connect to the i7, please go ahead.

As before, please hold off on rolling back RoonOS until we’ve looked at these logs.

Hi Benjamin,

I have successfully uploaded the ZIP file containing the Logs folder using the Roon Log Uploader.

The file was uploaded under my Roon Community username, Shigeharu_Kawauchi.

Please let me know once you have received the logs and had a chance to review them.

I look forward to hearing your findings regarding the USB-SFP connection issue.

Thank you for your continued support.