# USB-SFP Network Connection Fails After ROCK OS Update (ref#R9K39S)

**URL:** <https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018>\
**Category:** Support\
**Created:** [November 4, 2026, 1:36am UTC](https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018 "2026-11-04T01:36:48Z")\
**Posts on this page:** 18\
**Page:** 1

<div class="post-metadata">

**Author:** ![Shigeharu\_Kawauchi](https://community.roonlabs.com/letter_avatar/shigeharu_kawauchi/32/5_5575768a8748004e209b776fc1b2916d.png) [@Shigeharu\_Kawauchi](https://community.roonlabs.com/u/Shigeharu_Kawauchi)\
**Post date:** [November 4, 2026, 1:36am UTC](https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018/1 "2026-11-04T01:36:48Z")

</div>

#### Hi! What’s not quite right with Roon?
 

· None of the above quite fits

 
#### None of the above quite fits
 

· None of these quite match

 
#### Tell us what's going on
 

· Subject: USB-SFP Network Connection No Longer Working After ROCK OS Update  
  
Dear Roon Support Team,  
  
I am using Roon ROCK.  
  
Until recently, I had been connecting ROCK to my network via SFP using a USB-SFP converter, rather than using a conventional RJ45 Ethernet connection.  
  
However, after installing the latest ROCK OS update, network communication via the USB-SFP converter stopped working.  
  
When I switch to an RJ45 connection, I can communicate with ROCK without any problems.  
  
I really like the sound quality I get when using the USB-SFP connection, and I would prefer not to change my existing setup.  
  
I would therefore like to revert to the previous version of ROCK OS. Alternatively, if this issue can be resolved through an OS update, I would appreciate it if you could provide a fix.  
  
Thank you for your assistance.  
  
Best regards,

 
#### Tell us about your home network
 

· The USB-SFP converter is a Chinese-made unit with the model number LMK-TCF1000. Unfortunately, I don't know the brand name.

---

<div class="post-metadata">

**Author:** ![mjw](https://community.roonlabs.com/user_avatar/community.roonlabs.com/mjw/32/382057_2.png) [@mjw](https://community.roonlabs.com/u/mjw)\
**Post date:** [November 4, 2026, 9:20am UTC](https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018/2 "2026-11-04T09:20:53Z")

</div>

> [@Shigeharu\_Kawauchi](#):
>
> LMK-TCF1000

A quick search suggests that this device only supports Linux kernels up to 5.17, which was released four years ago.

I don’t know what Roon OS uses, but up-to-date Linux uses 7.x.

> **[E-link LNK-TCF1000:Your Solution for Gigabit Ethernet Access](https://e-lnkchina.com/e-link-lnk-tcf1000-your-solution-for-gigabit-access/)**
>
> E-link LNK-TCF1000 is a mini USB 3.0 Type-C to SFP 1000Mbps optical ethernet adapter that equipped with Realtek RTL8213B main control chip.

---

<div class="post-metadata">

**Author:** ![Carl](https://community.roonlabs.com/user_avatar/community.roonlabs.com/carl/32/49779_2.png) [@Carl](https://community.roonlabs.com/u/Carl)\
**Post date:** [November 4, 2026, 6:48pm UTC](https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018/3 "2026-11-04T18:48:06Z")

</div>

A post was split to a new topic: [About your setup](https://community.roonlabs.com/t/about-your-setup/327049)

---

<div class="post-metadata">

**Author:** ![noris](https://community.roonlabs.com/user_avatar/community.roonlabs.com/noris/32/161230_2.png) [@noris](https://community.roonlabs.com/u/noris)\
**Post date:** [November 4, 2026, 9:53pm UTC](https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018/4 "2026-11-04T21:53:00Z")

</div>

Hi @Shigeharu_Kawauchi.

Thanks for letting us know about the USB-SFP connection after the ROCK OS update. We’ve enabled and the team is reviewing the diagnostics from your ROCK.

If you’d like to roll back to the previous RoonOS version, please follow the instructions here:

> [@ROCK/RoonOS crashes every few minutes on NUC8i5BE(X) after update to RoonOS 3.0 (ref#J94EQG) \[Ticket In\]](https://community.roonlabs.com/t/rock-roonos-crashes-every-few-minutes-on-nuc8i5be-x-after-update-to-roonos-3-0-ref-j94eqg-ticket-in/326703/40):
>
> Hello everyone, The team is still looking into the root cause of this issue, but we have a plausible theory that the issue is related to the HDMI output capabilities on this specific model of NUC. As @drw and @Berry_De_Haas noted, connecting a screen appears to let the ROCK system run normally on RoonOS 3.0. Please try to connect your NUC via HDMI if you have a monitor, TV, or HDMI/EDID emulator available and are facing this issue on RoonOS 3.0. If you do not have anything HDMI to connect the …

Let us know how that goes.

---

<div class="post-metadata">

**Author:** ![Shigeharu\_Kawauchi](https://community.roonlabs.com/letter_avatar/shigeharu_kawauchi/32/5_5575768a8748004e209b776fc1b2916d.png) [@Shigeharu\_Kawauchi](https://community.roonlabs.com/u/Shigeharu_Kawauchi)\
**Post date:** [November 5, 2026, 2:13am UTC](https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018/5 "2026-11-05T02:13:12Z")

</div>

Thank you for your response.

I have read the RoonOS Recovery instructions, but I would like to clarify one point.

Does this recovery procedure actually allow me to roll back to the previous version of RoonOS, or does it simply reinstall or repair the current version?

My ROCK is currently booting and working normally via the RJ45 Ethernet connection. The only problem is that the USB-SFP network connection stopped working after the update.

I would prefer to restore the previous RoonOS version without losing my existing settings or database.

Could you please clarify the correct procedure for doing this?

Thank you for your help.

---

<div class="post-metadata">

**Author:** ![Shigeharu\_Kawauchi](https://community.roonlabs.com/letter_avatar/shigeharu_kawauchi/32/5_5575768a8748004e209b776fc1b2916d.png) [@Shigeharu\_Kawauchi](https://community.roonlabs.com/u/Shigeharu_Kawauchi)\
**Post date:** [November 9, 2026, 5:49am UTC](https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018/6 "2026-11-09T05:49:33Z")

</div>

Hello,

I am following up on my previous message, as I have not yet received a response.

I would appreciate clarification on the following points:

1. Does the RoonOS Recovery procedure allow me to downgrade to the previous RoonOS version, or does it only reinstall or repair the current version?

2. If downgrading is possible, can it be done without losing my existing database and settings?

3. Since the USB-SFP converter is currently disconnected, do you need me to reconnect it to reproduce the issue and collect additional diagnostic information?

I would also appreciate an update on the technical team’s investigation into why the USB-SFP connection stopped working after the ROCK OS update.

I would really like to continue using my USB-SFP connection, which worked perfectly before the update.

Thank you for your assistance. I look forward to hearing from you.

---

<div class="post-metadata">

**Author:** ![benjamin](https://community.roonlabs.com/user_avatar/community.roonlabs.com/benjamin/32/348120_2.png) [@benjamin](https://community.roonlabs.com/u/benjamin)\
**Post date:** [November 9, 2026, 10:40pm UTC](https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018/7 "2026-11-09T22:40:15Z")

</div>

Hey @Shigeharu_Kawauchi,

Thank you for the logs. Before we go further, we’d like to confirm one thing. The diagnostics we received come from two different machines: one with an Intel Core i5‑9400 running RoonOS 2.1, and one with an Intel Core i7‑13700K running RoonOS 3.0. Do you have two ROCK machines? If so, which one do you use with the USB‑SFP adapter?

Once we know that, please connect the USB‑SFP adapter to that machine, leave the RJ45 cable connected too, and reboot it. Let it run for about 10 minutes, then reply here with the time you rebooted. We’ll collect fresh diagnostics from it.

Until we’ve looked at those logs, please don’t roll back RoonOS.

---

<div class="post-metadata">

**Author:** ![Shigeharu\_Kawauchi](https://community.roonlabs.com/letter_avatar/shigeharu_kawauchi/32/5_5575768a8748004e209b776fc1b2916d.png) [@Shigeharu\_Kawauchi](https://community.roonlabs.com/u/Shigeharu_Kawauchi)\
**Post date:** [November 10, 2026, 1:02am UTC](https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018/8 "2026-11-10T01:02:51Z")

</div>

Hi Benjamin,

Yes, I have two ROCK machines, which I use at different locations and switch between depending on where I am.

- Intel Core i5-9400 running RoonOS 2.1

- Intel Core i7-13700K running RoonOS 3.0

The USB-SFP issue occurred on the i7-13700K machine running RoonOS 3.0. This is the machine I was using with the USB-SFP adapter.

As requested, I connected the USB-SFP adapter and kept the RJ45 cable connected as well. I then rebooted the ROCK.

The reboot was initiated at **9:47 AM JST on November 10, 2026** , and I was able to access the ROCK again at **9:51 AM JST**.

The ROCK has been running for approximately 10 minutes since the reboot.

Please collect the diagnostic information.

Thank you.

---

<div class="post-metadata">

**Author:** ![benjamin](https://community.roonlabs.com/user_avatar/community.roonlabs.com/benjamin/32/348120_2.png) [@benjamin](https://community.roonlabs.com/u/benjamin)\
**Post date:** [November 12, 2026, 11:23pm UTC](https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018/9 "2026-11-12T23:23:47Z")

</div>

Hey @Shigeharu_Kawauchi,

Thanks for confirming which machine has the problem and for rebooting it with both connections plugged in. Unfortunately, we weren’t able to collect diagnostics from the i7‑13700K after that reboot. To get around this, we’d like to ask you to send the logs to us directly.

1. Leave the USB‑SFP adapter and the RJ45 cable both connected to the i7‑13700K. Reboot it once more and let it run for about 10 minutes.
2. From a computer on the same network, open the ROCK’s Data share: `\ROCK\Data` on Windows or `smb://ROCK/Data` on Mac. If you’ve renamed the ROCK, use its name or IP address instead. On RoonOS 3.0, sign in with `Guest` as both the username and password.
3. Open the **RoonServer** folder and zip the whole **Logs** folder inside it. Put your Community username in the zip file’s name.
4. Upload the zip by following the steps in our [Accessing Roon Logs](https://help.roonlabs.com/portal/en/kb/articles/logs) guide, then reply here so we know it’s there.

Also, since you switch between two ROCK machines on one account, please make sure the i5‑9400 is powered off while you do this. Only [one Roon Server can be active per subscription at a time](https://help.roonlabs.com/portal/en/kb/articles/faq-what-if-i-need-more-than-one-subscription). If Roon asks you to unauthorize the other session when you connect to the i7, please go ahead.

As before, please hold off on rolling back RoonOS until we’ve looked at these logs.

---

<div class="post-metadata">

**Author:** ![Shigeharu\_Kawauchi](https://community.roonlabs.com/letter_avatar/shigeharu_kawauchi/32/5_5575768a8748004e209b776fc1b2916d.png) [@Shigeharu\_Kawauchi](https://community.roonlabs.com/u/Shigeharu_Kawauchi)\
**Post date:** [November 13, 2026, 8:54am UTC](https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018/10 "2026-11-13T08:54:44Z")

</div>

Hi Benjamin,

I have successfully uploaded the ZIP file containing the Logs folder using the Roon Log Uploader.

The file was uploaded under my Roon Community username, Shigeharu\_Kawauchi.

Please let me know once you have received the logs and had a chance to review them.

I look forward to hearing your findings regarding the USB-SFP connection issue.

Thank you for your continued support.

---

<div class="post-metadata">

**Author:** ![benjamin](https://community.roonlabs.com/user_avatar/community.roonlabs.com/benjamin/32/348120_2.png) [@benjamin](https://community.roonlabs.com/u/benjamin)\
**Post date:** [November 16, 2026, 10:06pm UTC](https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018/11 "2026-11-16T22:06:54Z")

</div>

Hi @Shigeharu_Kawauchi, thanks for uploading the logs.

Here’s what they show:

- **RoonOS 3.0 does detect the USB-SFP adapter.** Whenever it’s plugged in, it appears as a second network interface, so the driver isn’t missing.
- **The adapter never had an IP address when Roon Server started** , on any boot from November 6 to 13. Every time Roon was reachable, it was at 192.168.yy.200. That’s the address your RJ45 port had on November 6. So when both cables are connected, all traffic is most likely going over RJ45, and the SFP link isn’t carrying anything.
- **Network start-up was unreliable on some boots with the adapter connected.** On November 6 at 10:22 JST, Roon Server couldn’t reach the internet before the next restart. On November 11 at 10:18 JST, it took about 25 minutes to get online.

The Roon Server logs can’t show what’s happening on the link itself, so the next step is to test the SFP connection on its own:

1. Unplug the RJ45 cable, leaving only the USB-SFP adapter connected, and reboot the i7.
2. Wait about 5 minutes. Check whether the link lights are on, both on the SFP module and on the switch or router port. Also check whether your router’s DHCP list shows a new device.
3. If you can reach the ROCK, open the [RoonOS Web Administration Interface](https://help.roonlabs.com/portal/en/kb/articles/roonos-web-administration-interface). Click **Test connection** under Network Diagnostics and post a screenshot of the result.
4. If you can’t reach it at all, please tell us that, along with the time you rebooted (JST). You can then plug the RJ45 back in.

Two quick questions:

- In the Network & Access tab, is a static IP set for Ethernet (for example, 192.168.yy.200)?
- Which SFP module are you using in the LMK-TCF1000: fiber or copper, and the model if you know it?

About rolling back: our [RoonOS Recovery guide](https://help.roonlabs.com/portal/en/kb/articles/roonos-recovery) confirms that Roon Server, your settings and your databases are kept. Please still make a fresh Roon backup to an external drive first. We’d suggest waiting for the SFP-only test before rolling back, because the result will show whether this comes from a RoonOS change we can look into.

---

<div class="post-metadata">

**Author:** ![Shigeharu\_Kawauchi](https://community.roonlabs.com/letter_avatar/shigeharu_kawauchi/32/5_5575768a8748004e209b776fc1b2916d.png) [@Shigeharu\_Kawauchi](https://community.roonlabs.com/u/Shigeharu_Kawauchi)\
**Post date:** [November 17, 2026, 9:21am UTC](https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018/12 "2026-11-17T09:21:42Z")

</div>

Hi Benjamin,

Thank you for your continued support and for taking the time to investigate this issue.

Regarding your questions:

- **Ethernet IP address:** I changed the setting from a static IP address to DHCP.

- **SFP module:** I am using a DAC (Direct Attach Copper) cable.

I have also completed the SFP-only test on the i7-13700K ROCK.

As expected, the ROCK did not obtain an IP address when connected only via USB-SFP. However, the link lights on both the LMK-TCF1000 adapter and the MikroTik router were on.

I also tested the exact same LMK-TCF1000 adapter, DAC cable, and connection on another PC running Roon Bridge. It worked normally, and I was able to play music through that connection.

This confirms that the adapter and DAC connection are functioning properly on another PC.

Given these results, I would like to investigate why the USB-SFP interface on the ROCK is not obtaining an IP address, despite the physical link being established.

Could you please check the following on the RoonOS 3.0 side?

1. Whether the USB network interface is being initialized correctly.

2. Whether the DHCP client is running properly on that interface.

3. Whether there are any errors or issues preventing the USB-SFP interface from obtaining an IP address.

I would appreciate it if you could investigate this from the RoonOS side, rather than simply treating it as a physical connection problem.

Thank you again for your help.

---

<div class="post-metadata">

**Author:** ![Shigeharu\_Kawauchi](https://community.roonlabs.com/letter_avatar/shigeharu_kawauchi/32/5_5575768a8748004e209b776fc1b2916d.png) [@Shigeharu\_Kawauchi](https://community.roonlabs.com/u/Shigeharu_Kawauchi)\
**Post date:** [November 17, 2026, 9:49am UTC](https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018/13 "2026-11-17T09:49:30Z")

</div>

Hi Benjamin,

Thank you again for your help.

I have some good news. I managed to get the USB-SFP connection working.

Here is what I did:

1. I changed the Ethernet interface from a static IP address to DHCP.

2. I then manually assigned the original static IP address (192.168.88.xxx) to the USB-SFP interface.

3. With only the USB-SFP adapter connected, I was able to access the ROCK’s Web Administration page and play music.

4. I then rebooted the ROCK with the RJ45 cable still disconnected. After rebooting, the USB-SFP connection worked normally again, and I was able to play music.

So, the ROCK is now working with USB-SFP alone, without requiring the RJ45 connection, even during startup.

I’m still wondering what caused the original problem.

Could it have been an IP address conflict between the RJ45 and USB-SFP interfaces? Or could there have been an issue with DHCP or network interface initialization in RoonOS 3.0?

In particular, I’m curious why the USB-SFP interface could not obtain an IP address through DHCP, but worked immediately after I assigned a static IP address.

I’d appreciate your thoughts on what might have happened.

Thank you for your continued support.

---

<div class="post-metadata">

**Author:** ![benjamin](https://community.roonlabs.com/user_avatar/community.roonlabs.com/benjamin/32/348120_2.png) [@benjamin](https://community.roonlabs.com/u/benjamin)\
**Post date:** [November 17, 2026, 8:49pm UTC](https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018/14 "2026-11-17T20:49:45Z")

</div>

Hey @Shigeharu_Kawauchi,

Thank you for testing this so carefully, and we’re glad the SFP link works now.

An IP conflict probably wasn’t the cause. The adapter didn’t get a DHCP address in any of the logs from Nov 6–13. It also failed in your SFP-only test, when Ethernet was on DHCP and unplugged. A conflict wouldn’t stop the router from offering a lease.

Why the static address works: The link lights were on and the static address connects normally, so the cable, adapter and router port are fine. A static address skips the DHCP exchange, so the problem is only in that step on the USB interface in RoonOS 3.0. One likely cause is that the DHCP client gives up before the USB adapter’s link is fully up. We can’t confirm that yet.

You can keep using this setup. Please make sure the static address is outside your MikroTik’s DHCP pool, or reserve it there as a static lease, so the router can’t give it to another device. You can change the address later on the Network & Access tab of the [RoonOS Web Administration Interface](https://help.roonlabs.com/portal/en/kb/articles/roonos-web-administration-interface). A rollback isn’t needed now.

USB network adapters aren’t officially supported on [ROCK](https://help.roonlabs.com/portal/en/kb/articles/roon-optimized-core-kit), which expects the NUC’s built-in Ethernet port, so we can’t promise a fix. We’ll still pass your findings to our team. If you’re happy to help with one more test, it would show us what goes wrong:

1. Set the USB-SFP interface back to DHCP, leaving only the SFP cable connected.
2. Reboot and wait about 10 minutes, then note the time.
3. Set the static address again, then [zip and upload the Logs folder](https://help.roonlabs.com/portal/en/kb/articles/logs) as before.

If you’d rather not change a working setup, that’s fine. Please let us know either way.

---

<div class="post-metadata">

**Author:** ![Shigeharu\_Kawauchi](https://community.roonlabs.com/letter_avatar/shigeharu_kawauchi/32/5_5575768a8748004e209b776fc1b2916d.png) [@Shigeharu\_Kawauchi](https://community.roonlabs.com/u/Shigeharu_Kawauchi)\
**Post date:** [November 18, 2026, 9:33am UTC](https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018/15 "2026-11-18T09:33:17Z")

</div>

Hi Benjamin,

Thank you for the detailed explanation. I did some more testing on my side and found a few things that may help.

1. The MAC address of the USB-SFP adapter changes on every reboot under RoonOS.  
I had a static DHCP lease on my MikroTik for the adapter, but the MAC address in that lease no longer matched the one shown in the router’s ARP table. When I set the USB-SFP interface back to DHCP and rebooted several times, ROCK came up with a different MAC address each time, so the reservation never matched.

2. The adapter itself has a fixed MAC address.  
I connected the same adapter to a Windows PC and checked it with ipconfig /all. The physical address stayed the same after unplugging and replugging it several times. So it seems RoonOS 3.0 is not using the adapter’s own MAC address and assigns a different one on each boot.

3. DHCP now works.  
With the interface set to DHCP, ROCK now gets an address from the pool, unlike in the logs from Nov 6–13. I did not change any settings on the router or ROCK between those logs and these tests.

4. The static address during the problem was inside the DHCP pool.  
When the connection failed, the static address I had set on ROCK was inside the MikroTik’s DHCP pool. The one I use now is outside the pool. That may explain part of the original problem.

I’m now using a static address outside the DHCP pool, and I’ve removed the DHCP reservation since it can’t work with a changing MAC address. I’ve rebooted several times and the static address is kept each time.  
I’ve uploaded the Logs folder. I rebooted ROCK with the USB-SFP interface on DHCP at around 18:14 (JST) today, Nov 18.

I hope this helps your team. Please let me know if you’d like any more tests or logs.

Best regards,

---

<div class="post-metadata">

**Author:** ![vadim](https://community.roonlabs.com/user_avatar/community.roonlabs.com/vadim/32/335515_2.png) [@vadim](https://community.roonlabs.com/u/vadim)\
**Post date:** [November 18, 2026, 2:55pm UTC](https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018/16 "2026-11-18T14:55:31Z")

</div>

Hi @Shigeharu_Kawauchi,

Thank you for the extra testing and the new logs. The changing MAC address is a useful finding.

Our RoonOS team has already fixed an issue where USB network adapters could fail to get an address via DHCP, which is likely why DHCP works for you now. We’ve also passed on your note about the MAC address changing on each boot.

To keep your setup stable:

1. On your MikroTik, open IP \> DHCP Server, select the DHCP server for that bridge and turn on **Add ARP For Leases**. That way the router updates its ARP table whenever the adapter comes up with a new MAC address, instead of keeping a stale entry.
2. Keep the static IP on the ROCK itself, set in the RoonOS Web Administration Interface under Network & Access, using an address outside the MikroTik’s DHCP pool, as you have it now. Since the MAC changes on every boot, this is more reliable than a DHCP reservation on the router.

We’ll close this thread for now, but feel free to reach out if anything changes.

---

<div class="post-metadata">

**Author:** ![Shigeharu\_Kawauchi](https://community.roonlabs.com/letter_avatar/shigeharu_kawauchi/32/5_5575768a8748004e209b776fc1b2916d.png) [@Shigeharu\_Kawauchi](https://community.roonlabs.com/u/Shigeharu_Kawauchi)\
**Post date:** [November 19, 2026, 12:48am UTC](https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018/17 "2026-11-19T00:48:52Z")

</div>

Thank you, Vadim. I’ve turned on Add ARP For Leases and will keep the static IP outside the DHCP pool. Everything is working well now. Thanks to you and Benjamin for your help.

---

<div class="post-metadata">

**Author:** ![system](https://roon-community-uploads.s3.amazonaws.com/original/3X/d/e/deefbd9083c99c82bbf2dd3f873f52a49f5db881.png) [@system](https://community.roonlabs.com/u/system)\
**Post date:** [November 20, 2026, 12:49am UTC](https://community.roonlabs.com/t/usb-sfp-network-connection-fails-after-rock-os-update-ref-r9k39s/327018/18 "2026-11-20T00:49:29Z")

</div>

This topic was automatically closed 24 hours after the last reply. New replies are no longer allowed.
