WEB UI only shows splash logo screen [Resolved]

Support
1

Core Machine (Operating system/System info/Roon build number)

  • Intel NUC NUC7I5BNH (Intern SATA M.2 SSD 2242 Box Transcend MTS400S M.2 128 GB, Corsair 8GB (1x8GB) / 2133MHz / DDR4 / CL15 / CMS08GX4M1A2133C15)
  • Roon Version 1.7 (build 571) stable
  • RoonOS Version 1.0 (build 227) stable
  • OS Version Firmware 1.0 (build 227) stable

Network Details (Including networking gear model/manufacturer and if on WiFi/Ethernet)
TECHNICOLOR TG799VAC XTREAM. Ethernet.

Audio Devices (Specify what device you’re using and its connection type - USB/HDMI/etc.)
RPI 3b+ running Ropieee 2.573 stable. Connected through ethernet to router, optical connection into receiver.

Description Of Issue
Trying to access the WEB UI via http://[ip-adress]:9100/display/ only shows a splash/logo screen. Nothing else besides a question mark icon with a link to https://kb.roonlabs.com/Displays#Web_Display. The IP adress matches the NUC:s, so not sure what is the issue here.

ROCK has been updated and rebooted, but no difference.

2

You’ve used the IP address for the web Display (by including the :9100/display suffix). Just use the IP address of the NUC to get to the Web Administration page.

3

Not sure what I should replace, it is the same IP adress. I have used what Roon has given me (in the only place where I can find a WEB URL to anything outside of the Roon interface.

You are probably right, but still don’t know what to change. Also shouldn’t the display work (what is the point of a local logo screen)?

4

Use only: http://[ip-adress] for the web admin page.

5

Thanks, that solves my issue. Sometimes the solution needs to be crystal clear.

6

The Web Display works when you couple it to a zone. See the KB article.

7

This topic was automatically closed 36 hours after the last reply. New replies are no longer allowed.