HQPlayer Setup question

Exactly! I have just restored from NAS backup, all going to plan so far, famous last words…Next, HQ Player!


Zippier is a good way to describe it. I think it is zippier, but, others might not notice.

1 Like


I have it all installed now. One of my initial questions about HQ Player is around volume set-up. I have it set to fixed in Roon and you can see how it is in HQ Player from these screen shots, does it look right? Do any of the other settings jump out as incorrect?

It’s not visible there but you should make sure you have some digital volume attenuation in HQP also (-3 dB is a good starting point).

See if you can post more screenshots of the HQP settings.

One other thing to consider, is you can use HQP as a single DSP engine, by importing your convolution filter into HQP.

Then you can just have Roon playback set to bitperfect (lossless) and let HQP do ALL the DSP.

Hi @lkjhgdaa,

I can’t see for looking, how do I set this? Thanks.

What screen shots might be useful here? Here is a bigger shot of the settings.

This sounds good. I used Magnuses guide on the Roon forums to do the room correction. So I have a single zip file with all the .wav filters generated by REW. I can see the convolution setup in HQ Player but I am not quite sure how to use it, any tips?

Thanks for your help.

1 Like

Thanks for the additional screenshot Ross.

I can now see you have min volume at -20 dB and max at +10dB. Change the max volume to -3dB.

I don’t use HQP Desktop (I use Embedded version) but from memory the volume knob adjusts HQP volume. I’d just set it to -3dB and leave it there, to start with.

Other settings look fine.

I haven’t played with it myself just yet. My expertise unfortunately ends at just knowing it can be done lol.

I’m sure one of the other lads here will help out. Maybe @jussi_laako can give some tips.

When I get around to using digital room EQ, having HQP as the single DSP engine is what I’ll be doing.

In the mean time, have a play around. You might stumble on getting it working, while waiting for one of the others to help out.

Check out the manual too, there might be something in there that helps you get started.

Thanks @lkjhgdaa

I have adjusted as you suggest. See below.

I have set the dial to -3dBFS, which obviously bumps the volume quite a bit. Perhaps @jussi_laako could tell me if this is in the right area.

Looks like I need to do some research and tinkering with convolution then. I just had a look at the price. Its £231.16 in the UK which is obviously not cheap but I am impressed with the sound even at this early stage.

1 Like

Hi Ross

You’ve set the max volume to +3.0 dB… Change that to -3dB as previously recommended.


Thanks @lkjhgdaa, I have adjusted as per screen shot. Do you think the dBFS is correct?

Yep, looks like the max of the volume knob there is -3dB, which is what you’ve set it to (and is recommended, as starting point). So all good!

Feel free to go lower in volume with that knob, if you need. It was setting the maximum to -3dB that was most important. You can turn the knob for lower volume.

I set both manually, I will have a play around with the dBFS setting. Thanks.

Nice work. Just to be a bit clearer, make sure this always stays at -3dB (don’t ever change it):


But feel free to adjust this whenever you want, depending on track/album playing (if you ever need):


1 Like

Ok, thanks @lkjhgdaa, much appreciated.

1 Like

Hi @lkjhgdaa - I have just been playing around again. I am a little confused by the volume options open to me. I currently have Roon set to ‘Fixed’, I have HQ Player set to -3dBFS (as shown on the dial above), I also have the ability on my office set up to adjust the volume via my Arcam IrDACII and in theory on my active Adam F5 nearfield speakers (although I would need to go around the back, so not something I would want to adjust often but possible). In my lounge set-up I can also adjust the volume via my amplifier, a Musical Fidelity M3i. So, should I just leave HQ Player as is (e.g. -3dBFS) and adjust the volume via the IrDACII in my desktop set-up and via the M3i in my lounge set-up? I suppose I am asking which of these options is likely to result in the best quality?

Happy for any opinions for a novice in this area! Thanks.

I would stick with the physical volume knob in all of your cases.

You would only need to drop HQP’s digital volume below -3dB if you notice any clipping in HQP. I don’t use the Desktop version so somebody else would need to help with how clipping is indicated. Maybe check the manual.

In my first reply to you I mentioned-3dB is a good starting point and later mentioned that you can go lower if you needed.

I personally have it set to -6dB and I don’t pay anymore attention to it. But that’s just me. So apologies for my reply above which said “don’t ever change it”. I should have put an asterisk and explained a bit more.

A detailed explanation (example) of why this -3dB may change track to track, or album to album is below. But as I mentioned, I leave mine set to -6dB and forget about it.


And I stick to physical volume knob/remote for actual volume control.

Apologies for causing some anxiety here. Hope this helped a bit.

Some additional info by Jussi here:

Thanks for both replies @lkjhgdaa, it is much appreciated. I will go and have a read now.

1 Like

No worries at all @Ross .

I hope you can get HQP handling your digital room EQ, so when I need help with it, you can return the favour by helping me through it :grin:

1 Like

It might be the ‘blind leading the blind’ then!! I will get to it, although I am pulling lots of stuff together. I am demo’ing some speakers on Thursday for my main listening room and I am also in the process of ripping 3000+ CDs right now, I am not sure how many. However I did just purchase HQ Player!!

1 Like

2 posts were merged into an existing topic: Setting up HQPlayer within Roon