@Robert_Fielder is your mac using SSD … if not then you are not going to be seeing the best speed of the user interface as the database really needs a fast drive and spinning HDD’s in a MacMini are like molasses compared with an SSD
Its HDD. All my music is on my NAS so only Core will be on my Mac
There are good online places to get better SSD drives (although also need a fan for these). I have about 25 GB free at the moment in my boot disk.
I guess what I am trying to say is that by installing Roon and hoping to have an okay user experience that
a) I’m not going to crush my Mac into submission and face hours of the spinning wheel for my other applications
b) I have an entry level piece of kit that will work (if not at the most optimal))
Why would you need a fan for SSD… depending on the MAC model upgrade to SSD is fairly easy…2012 vintage is quite easy see macsales.com as posted above.
You still haven’t said what exact MAC you have so I can’t guide you with any more detail.
Any SSD will be a better experience even for your MAC apps … I have several older MacBook’s and Macmini pre 2010 that are all using SSD’s…well worth the upgrades - like having a new mac almost
Have a desktop iMac - 2011
iMac “Core i5” 2.5 21.5-Inch (Mid-2011) - from the MAC Upgrades site after entering my serial number
RAM: 4GB 1333 MHz DDR3
I agree that adding some extra SSD and RAM will super charge my MAC for the other applications - but all we really use it for is emails and kids you tube anyway.
Really need to know if Roon Core will work as is… (haven’t heard anything to say that it won’t)… yet!! If i can get away with forking out a couple of hundred £ for SSD and RAM then I will!
Check out this comment. In particular:
It feels like the answer to most “will it work?” questions is going to be “It’ll work, but it won’t be as good as it could be”, because lets be honest, no-one is going to wonder whether a Mac Pro works flawlessly or not.
Flash/SSD storage is a big win. The metadata and artwork databases I was talking about are sitting in your home directory on your boot drive. If you have a small amount of music (lets say, less than about 1500 albums), it barely matters, but as your collection creeps up towards 5,000 or 10,000 albums or more, storage performance begins to matter a lot.
Just bite the bullet and get a NUC 7i5. Considering the expense you’ve put into the gear, and ROON, your server is the heart - it’s what makes it all work, and the NUC is practically a bargain. Don’t try and skimp or cut corners there or make do. You’ll be happier in the long run.
Its below the recommended spec for CPU (i3 Ivy Bridge) and without SSD you will not get the best use experience.
Try it by all means… but as noted as your database grows it will get slower for searching etc… music analysis could take a long time and DSP options will be very limited with that CPU and limited cores.
At 1000 CD’s now you might get by OK
Will i be able to play TIDAL MQA through my system?
MQA files are compatible with RedBook CD / PCM streams, so yes.
However, at present Roon does not decode (unfold) MQA so unless your endpoints can, you will only be able to listen to standard rate resolution from MQA.
That said, once Roon can decode MQA [it’s on the roadmap] your Airplay devices won’t be able to take full advantage as Airplay is limited to only x1 rate.
Hope that helps.
I was told by the guys at Naim (I have an Atom) that it could?
Is that right?
I have a Tidal Masters Subscription
You will be able to play MQA files, including TIDAL Masters, on all your devices through Roon. But the resolution will be limited by the connection protocol and the device’s capabilities. AirPlay has limited resolution. RAAT doesn’t. If you use AirPlay to connect, then the device will receive only a 44.1/48 kHz signal, no matter what other resolutions the MQA file has encoded within it. In that case you will need an MQA capable device to unfold it if you want the higher resolution.
If you use RAAT to connect, then (in future) Roon will do a first unfold and send a 88.2/96 kHz signal to all devices. Any MQA capable device can then render that to any higher resolution encoded in the file.
I have a Naim Atom - will this do any of the unfolding for me? It’s hard wired through Ethernet
Are the Atoms the same thing as the Uniti Atom ? If so they are Roon Ready and will be able to receive an 88.2/96 kHz signal from Roon after it performs a first unfold of an MQA file. They don’t appear to have any MQA decoding or rendering functionality themselves, so first unfold through Roon is it.
Yes Naim Atom. Thanks!
Planning on starting the download and setting up my core on Weds.
anyone able to tell me where to go on Roon for it to discover my naim’s?
17 posts were split to a new topic: Two Naim Atoms and Roon is only recognising one of them as Roon Ready
Have just gone in this morning to try and now roon has lost the links to all my devices that i was trying last night. No Naim, No B&W zepplin, no yamaha amp (airplay). Just the computer speakers are under the output menu
Try rebooting your Roon core.
Thanks. Have quit the core and restarted.