Coreelec & Roon bridge

Roon Software Discussion Linux
1

Hello, gents

Anyone had any luck installing Roon bridge to Coreelec device on Amlogic s922X’ish cpus ? Coreelec is root-by-default, I cannot sudo the .sh script, I’m kinda lost here?

Thanks for any tips,
Vadym

2
3 Likes
Roon on Sony UBP-X800
4

It outputs multi-channel PCM up to 7.1 and you can select the channel layout to correspond to your particular setup within roon.

1 Like
6

I’ve tried but I can’t continue :frowning: Any clue?

CoreELEC:~ # ./roonbridge-installer-linuxarmv8.sh 

--------------------------------------------------------------------------------------

Welcome to the RoonBridge installer

This installer sets up RoonBridge to run on linux with the following settings:

 - RoonBridge will be installed in /opt/RoonBridge
 - RoonBridge's data will be stored in /var/roon/RoonBridge
 - RoonBridge will be configured to run as a system service
 - RoonBridge will run as root

These settings are suitable for turning a dedicated or semi-dedicated device
into an appliance that runs RoonBridge

If you want customize how RoonBridge is installed, see:

   http://kb.roonlabs.com/LinuxInstall

--------------------------------------------------------------------------------------

Do you want to install RoonBridge on this machine? [Y/n] Y

Downloading RoonBridge_linuxarmv8.tar.bz2 to /tmp/tmp.8V8iML/RoonBridge_linuxarmv8.tar.bz2

Connecting to download.roonlabs.net (172.66.148.147:443)
saving to '/tmp/tmp.8V8iML/RoonBridge_linuxarmv8.tar.bz2'
RoonBridge_linuxarmv 100% |************************************************************************| 17.1M  0:00:00 ETA
'/tmp/tmp.8V8iML/RoonBridge_linuxarmv8.tar.bz2' saved

Unpacking RoonBridge_linuxarmv8.tar.bz2...Done

Checking to see if RoonBridge can run on this machine 

    Checking for Binary Compatibility                            [ FAILED ]
    Checking for ALSA Libraries                                  [ FAILED ]

STATUS: FAILED

These issues must be addressed before RoonBridge will run on this machine.

For more information on how to address this, see:

   http://kb.roonlabs.com/LinuxInstall


--------------------------------------------------------------------------------------

The RoonBridge installer did not complete successfully.

If you are not sure how to proceed, please check out:

 - Roon Labs Community            https://community.roonlabs.com/c/support
 - Roon Labs Knowledge Base       https://kb.roonlabs.com/LinuxInstall

--------------------------------------------------------------------------------------