Dropouts with RopieeeXL 396, Pro-Ject S2, ROCK and TIDAL

Hi there,

I’m observing some dropouts with MQA tracks with this setup. I am running a Raspberry Pi 3 Model B Rev 1.2, ROCK Version 1.7 (build 511) stable. This is the log #### fbf7e2b76019616d.

RoPieee is running over WiFi (no option to do otherwise), ROCK is connected via a wired connection to the router, and didn’t observe the same with non-MQA tracks, so I wouldn’t be surprised if it is a network issue, but figured I’d check. It is only sporadic and I did try to increase the buffer to the 500ms max in the Roon controller.

I should add that I use a Google WiFi mesh WiFi system.

Thanks for any help!

Your unit is reporting under-voltage. I would suggest you look into your power supply.

WiFi is probably the main culprit here if non mqa works

Agreed, but the power reports were very frequent so I suggest to start there.

Is it possible to show power voltage status with the other things like temp and uptime?

Thank you! Will try a different PSU.

Or provide a way to access the log file.