NAD D3020V2 Integrated Amplifier
Operationally excellent, cosmetically good (for a few surface scratches on the sides and small dent in remote).
Includes amplifier, remote, power cord, adapter for subwoofer (mini to RCA), documentation, original packaging. Has optical, coax, rca (aux), Apt-X BT, MM phono, sub-out, pre-out, and 12v trigger in.
Double boxed (technically triple boxed) for shipping. $399 plus $25 shipping anywhere in contiguous US. Paypal preferred.
Audio Specs
Rated Power at 8 ohms - 2 x 30 Watts
IHF Dynamic Power 8 ohms - 2 x 60 Watts, 4 ohms - 2 x 100 Watts, 2 ohms - 2 x 150 Watts
Signal/Noise Ratio (A-weighted, ref. 1 Watt): ≥90dB
Channel Separation 1kHz: ≥75dB, 10kHz: ≥65dB
Channel Balance: 0 ±0.3dB
Frequency Response (20Hz – 20kHz): 0dB to -0.3dB
Total Harmonic Distortion: ≤0.005%
Maximum input level: 5V
IMD (SMPTE): 0.02%
IMD (CCIF): 0.003%
MM Phono Input
Phono Signal-to-Noise Ratio: >82 dB (200 ohms source, A-weighted, ref. 500 mV out)
76 dB (MM cartridge source, IHF; A-weighted, ref. 500 mV out)
Input sensitivity: 1.15 mV (ref. 500 mV out, Volume maximum)
Maximum input signal at 1kHz: >90 mVrms (ref. 0.1 % THD)
Frequency response: ±0.3 dB (20 Hz – 20 kHz)
General
Standby Power: ≤0.5 Watts
Supports bit rate/sample rate: up to 24/192 (via Digital Audio input)
Unit Dimensions (W x H x D) Gross: 58 x 186 x 219mm / 2 5/16 x 7 3/8 x 8 5/8”
Net Weight: 1.38kg (3.05lb)
Shipping Weight: 2.1kg (4.6lb)
