Roon, stable or what...? It is for me

No Roonserver… Just the endpoint.

ow ok. That explains it :wink:

the memory leak is present in roonserver.

Stable depends on what update/build you’re asking? Mostly stable but some updates where buggy in the past.

@ronaldwanders what program generated that output? It’s a lot of good info.

1 Like
echo "===================================================================================================="
TO_ECHO="$(date +%s)"
echo "*LINUX DATE IN SECONDS: $TO_ECHO"
echo "----------------------------------------------------------------------------------------------------"
echo "*TIME, UP TIME, USERS, SYSTEM LOAD (ALL MUST BE BELOW 0.09)"
uptime
echo "----------------------------------------------------------------------------------------------------"
echo "*USB AND ETHERNET INTERUPT HOOK CORE ASSIGNMENTS"
cat /proc/interrupts | grep -E '.usb|.ethernet'
echo "----------------------------------------------------------------------------------------------------"
echo "*ETHERNET STATUS AND STATISTICS"
ifconfig | grep -E 'eth'
ifconfig | grep -E 'Bcast:'
ifconfig eth0 | grep errors:
#ethtool eth0 | grep -i speed
mii-tool eth0
echo "----------------------------------------------------------------------------------------------------"
echo "*MOUNT STATUS"
mount | grep "ext4"
mount | grep "cifs"
echo "----------------------------------------------------------------------------------------------------"
echo "*KNOWN AUDIO DEVICES"
cat /proc/asound/cards
echo "----------------------------------------------------------------------------------------------------"
echo "*AGAIN TIME, UP TIME, USERS, SYSTEM LOAD (ALL MUST BE BELOW 0.09)"
uptime
echo "----------------------------------------------------------------------------------------------------"
echo "*KNOWN MUSIC APPS RUNNING WITH CORE ASSIGNMENTS AND NICE PRIO"
ps -TAo spid,ni,psr,comm | grep squeezelite
ps -TAo spid,ni,psr,comm | grep mpd
ps -TAo spid,ni,psr,comm | grep mono-sgen
ps -TAo spid,ni,psr,comm | grep processreaper
echo "----------------------------------------------------------------------------------------------------"
echo "*ADDITIONAL INFO"
echo "**CURRENTLY PLAYING AT SAMPLE FREQUENCY OR 2 TIMES STOP IS NOT PLAYING"
cat /proc/asound/Audio/stream0 | grep 'Status:'
cat /proc/asound/Audio/stream0 | grep "Momentary freq = "
echo "**VM.SWAPPINESS MUST BE DEFINED AND 0 - IF NOT USE SWAPOFF -A"
cat /proc/sys/vm/swappiness
sysctl -a | grep vm.swappiness
echo "**FS.INOTIFY.MAX_USER_WATCHES MUST BE DEFINED AND LESS THAN 1024"
cat /proc/sys/fs/inotify/max_user_watches
sysctl -a | grep fs.inotify.max_user_watches
echo "**CONFIG_HZ SHOULD READ 1000 OR 250"
zcat /proc/config.gz | grep CONFIG_HZ=
echo "===================================================================================================="