RoPieee and Audiolab 9000A

Hi,

I can’t seem to get ropieee and the Audiolab to play nice with each other over usb.
Every time I turn on the amp it will say no audio signal even when in roon the audiotrack is playing.

I’ve plugged in my server (mac mini M2) over usb to see if there could be a problem with the amp but with the mac all is working perfectly. The Audiolab is roon tested so I can see it’s icon and music plays just fine. I can restart the amp and every time roon immediately sees the amp and music is playing.

Back to the rpi 4 and RoPieee, If I unplug the usb cable from the rpi and plug it in again then sometimes the Audiolab does receive a signal and I can play music until I turn of the amp. On next restart it will again say no signal…
Could this be an issue with ropieee not being compatible with the dac inside the Audiolab or a wider issue with rpi devices?

Likely it doesn’t play well with Linux or the power management of the USB on the pi.

I think the other way around :wink: The DAC not being compatible with RoPieee.

Can you send me feedback so I can have a look?

I’ve switched to the rpi again to send the feedback but will swap back to the Mac to be able to play music for the time being.

identifier: 91ed247ac7a4c14a

Thank you very much for taking the time to look into this!