Hi all,
we are excited to announce built-in support for Roon in T+A MP 1000 E Multi Source Players!
Starting with today’s firmware release, all T+A MP 1000 E players (all the way back to the very earliest models) can stream high-resolution audio directly from Roon!
Further information on the T+A MP 1000 E Multi Source Player can be found here: MP 1000 E - detailed information
All that is needed to make your MP 1000 E player roon ready is a simple web based firmware update.
Firmware Update
A description of the firmware update process can be found in the MP 1000 E user manual in chapter “Software Update”. MP 1000 E User Manual
The software update will need some time. Please be patient and wait until the update process has finished.
After successful installation of the latest firmware the MP1000 E should be detected by the roon system and you can find it as a certified roon ready device under Settings/Audio on your roon remote.
Hint for MP 1000 E players with firmware versions before V 1.07.
If your MP 1000 E is running on a streaming client firmware version before V 1.07 (or if your MP1000E is not detected by your Roon system after a firmware update) a 2-step update is required. Please proceed as follows:
After doing the firmware update as described above, please switch OFF your MP 1000 E, then switch in ON again.
After the MP 1000 E has re-booted and network connection is established, please start the software update process a second time (the same way as described above).
After completing this second update, your MP 1000 E should now be detected by the Roon system as a roon ready device.
Enjoy,
L.