Hello. I have a Qnap with i5 core and I installed as a core the Roon server. Everything is detected and perfectly done. I installed the remote in the iPhone 13 Max and no problem all was configure perfectly. However if I select the mojo2/poly output is not sending the MQA quality or hires. Is sent a…

Now I’m checking the stability and is not so good. I also opened a Qobuz account but both Tidal and Qobuz accounts say is slow and crash the music stops or skip tracks. For example, i attach 1 photo of a Beethoven song in 192kHz quality in Qobuz. Check the me error message. The same happens to Tidal…

Follow the troubleshooting guide and see if you can isolate/narrow down your issue: [image] Troubleshooting Audio Dropouts Overview This document contains information about tracking down and troubleshooting issues that lead to audio dropouts, in particular with RAAT-based outputs, inclu…

That error is indicative of poor network performance.

Network issues I have the highest speed in Spectrum and also I have the core wired to the router using 2 outputs the speed of internet. I did this time ago to stream with Plex 4K movies at full and no problems at all. I can stream 4K at full. Now I don’t have streaming in Plex to leave alone the wo…

[image] Alex_Esc: Network issues I have the highest speed in Spectrum and also I have the core wired to the router using 2 outputs the speed of internet. I did this time ago to stream with Plex 4K movies at full and no problems at all. I can stream 4K at full. Many such as yourself have said …

[image] Alex_Esc: Network issues I have the highest speed in Spectrum and also I have the core wired to the router using 2 outputs the speed of internet. Nonetheless, the problems you have are indicative of an underlying networking issue. If you would like assistance, please provide details …

The poly is known to have poor Wi-Fi performance as it only supports 2.4ghz which in a saturated area can be very poor.

Did you not return your AK because of poor performance on 2.4ghz?

Yes it was shocking any where in the house and I have 3 access points over the 3 non overlapping channels , many users on here gave up on the poly for same reasons, it’s very picky. I can run anything else on 2.4ghz with no issues at all. They just use poor quality Wi-Fi internals.

Shame really… What Chord should have really done: Get rid of micro USB for the Mojo 2. Get rid of micro USB for the Poly and update wireless connectivity. It’s the 21st century. For now I am keeping my Mojo 1 since it powers my planar cans very well. Plus, I would not get more than £200 for it …

Trial MQA or High Res not showing in mojo2/poly iPhone Tidal

Support

mjw (You want nice, supportive? Call a damn helpline.) July 21, 2022, 6:10pm 19

Nonetheless, the problems you have are indicative of an underlying networking issue.

If you would like assistance, please provide details of your Roon setup as described in this post.