Found my list:
I did this:
CanaKit Raspberry Pi 3 B+ (B Plus) with 2.5A Power Supply (UL Listed) https://www.amazon.com/dp/B07BC6WH7V/ref=cm_sw_r_cp_tai_7BpkEbGHJPCB5
HiFiBerry Digi+ Pro https://www.amazon.com/dp/B01MZZRM1V/ref=cm_sw_r_cp_tai_BCpkEbE6J8DDW
—this gives a coax digital output. Not sure if that’s what you need.
GeauxRobot Raspberry Pi 3B+/3B 2-layer Dog Bone Stack Clear Case Box Enclosure also for Pi 2B B+ A+ https://www.amazon.com/dp/B00NU70MZS/ref=cm_sw_r_cp_tai_ODpkEb8552DSP
SanDisk 16GB Ultra MicroSDHC UHS-I Memory Card with Adapter - 98MB/s, C10, U1, Full HD, A1, Micro SD Card - SDSQUAR-016G-GN6MA https://www.amazon.com/dp/B073K14CVB/ref=cm_sw_r_cp_tai_qEpkEbTT8VYE6
Others may weigh in. It all screws together. Not much by way of instructions but it’s pretty intuitive. You’ll only need 2 of the case layers.
Follow beginner guide. Mine worked first time and really sounds great. I dig the clear case but that’s not dogma either.
Aaaaand for the rock:
ROCK For Small to Medium Sized Libraries
We recommend the NUC8i3BEH with 4GB RAM and 64GB M.2 SSD for small to medium-sized libraries. Please note that 4GB RAM sticks and 64GB M.2 SSDs are difficult to find, and there’s little price difference between the 8GB and 128GB upgrades. You can find these components on Amazon at the links below, or add them to your Amazon cart with one click further down.
| Component | Amazon US | Amazon UK | Amazon DE |
|---|---|---|---|
| NUC8i3BEH | View | View | View |
| 8GB RAM | View | View | View |
| 128GB M.2 SSD* | View | View | View |
*If you are planning to add a non-M.2 SSD for internal storage, please note that the Intel NUC will only accept 2.5" drives with a maximum 9.5mm thickness
You can add the base NUC8i3BEH + 8GB RAM + 128GB M.2 SSD to your Amazon cart with one click at these links: