Eversolo DMP-A8 only detected as Airplay on ROCK NUC13 (ref#4V9IOO)

Hi! What’s not quite right with Roon?

· None of the above quite fits

None of the above quite fits

· None of these quite match

Tell us what's going on

· I had roon running on a synology DS918+ NAS and roon was detecting properly my Eversolo DMP-A8 streamer. I now moved roon to ROCK running on an Asus NUC13 and the eversolo is only seen as an airplay device, not via RAAT. Same network configuration as before, NAS, NUC, and Eversolo all connected to the same unmanaged gigabit switch.

Tell us about your home network

· All device connected to the same Netgear GS108 unmanaged gigabit switch, behind an orange domestic fiber router.

Screenshot of Audio Devices would help.

Probably in Audio Devices the Eversolo would need to be enabled. Airplay enabled is it’s own device protocol.

–MD

The roon ready icon actually appears for a few seconds when I power on the eversolo, but then it disappears.

Is your network set to Static or DHCP for the Eversolo? I assume that you power cycled the Eversolo after new setup?

–MD

Yes: I power cycled everything.
Eversolo was connected with fixed IP. I changed it back to DHCP (since the IP address is anyway fixed by the router assignment) and it is found again!

This is strange: DHCP getting the same IP address vs. fixed IP with same parameters… both should be working…
Anyway, I have a solution now so I won’t worry too much.

1 Like

Glad to hear this fixed it.

Btw - Welcome to the forum. It is a good source for info.

–MD

Hello @Vittorio ,

Thanks for reaching out to our support.

We are glad that @MikeD helped you to resolve your issue.

Please feel free to let us know in case of any questions.

Enjoy your music!

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.