Frequent disconnection of my RME ADI-2 Pro FS output

Support
1

Roon Core Machine

Mac MIni Intel I7, 16 GB with the latest version of Roon Server.
No anti virus.
No other software running.

Networking Gear & Setup Details

The mac is connected to my router, a livebox Orange, with no network switch in between.
The IP address is fixed.
Connection speed : 1 Gbps

Connected Audio Devices

RME ADI-2 Pro FS R
The Mac Mini and the RME ADI-2 are connected with a UBS cable

Number of Tracks in Library

Tidal + Qobuz.

Description of Issue

Frequent connections dropout. Pretty much random.
Lately it has become very frequent. Sometimes, many times per piece.
The output (the RME ADI-2) disconnects from the Roon server : it disappears from the audio output list of the Roon server. And then, it reconnects one or 2 seconds after and reappears on the list.

3

Might seem an obvious suggestion, but have you tried a different network cable and a different USB cable?

4

Well, sometimes things are too obvious to be seen…
I shall try.
Thank you.

5

you could also check that the firmware is up to date - honestly that’s probably not your problem.

on the RME website: ADI-2-DAC FS - RME Audio Interfaces | Format Converters | Preamps | Network Audio & MADI Solutions then click on the “drivers” tab - yes I know that firmware updates are not drivers, but my German is not good enough to evaluate whether it makes sense in German.

6

It is up to date.

7

Roon server has been updated and it seems that the problem has gone away.

8

This topic was automatically closed 36 hours after the last reply. New replies are no longer allowed.