Linn Klimax Zone Unavailable After Network Change to Tahoe 26.2 (ref#W3G0VP)

What best describes your playback issue?

· A connected audio device is not appearing in Roon

What type of Zone is affected by this problem?

· *Directly-connected Zones* are affected.

Is your RoonServer machine running MacOS 15 Sequoia or above?

· I still can't see my endpoints as available Zones.

Is the affected network Zone connected with Ethernet or WiFi?

· Ethernet

Which network audio protocol is the Zone using with Roon?

· RoonReady

Does the device show up at all in Roon Settings -> Audio?

· No, it does not show up there

Does the device play audio from another source when using the same connection?

· The device has no problems with another audio source

Have you checked that Roon is whitelisted in any firewalls?

· I've checked the firewall and the issue remains

Since you are using a network connection to the device, please ensure that your RoonServer is on the same subnet as the device

· My devices are on a single subnet but is not visible to Roon

Do you have a complex network setup?

· Both the device and RoonServer are connecting to a *single router*

Try to disable any additional networking interfaces on your RoonServer machine.

· Disabling network interfaces had no change in behavior

Check to make sure RoonReady mode is selected on the device.

· I've checked this and the issue remains

If the device has multiple output options, do the other options work as expected?

· Only one output type is affected while the other output type works as expected

Is the device using the latest firmware as per the manufacturer?

· Firmware is up-to-date but the issue remains

Do you have an approximate timestamp of when the issue last occurred?

· Tried to find zone this am about 10:15, US PDT.

What are the make and model of the affected audio device(s) and the connection type?

· Nope

Describe the issue

Just closed a ticket for same issue, only now the network is under Tahoe 26.2, rather than Sequoia 15.7.3. My sole zone of interest is an Ethernet connected Linn Klimax. Roon is located on Ethernet connected Nucleus. Zone available last night. Now unavailable, despite no shutdown of anything, no power outage. Tries toggling network permission for roon, to no avail. Previous ticket closed about a week ago. Driving me nuts, as this is simple setup, and audio’s held hostage, literally by this black box ( Nucleus). Apple’s been no help yet.

Describe your network setup

See above

Duplicate of Linn Klimax zone unavailable after successful operation on Nucleus (ref#VS41F9), closing this one.