NAD/Bluesound Grouped Zones out of sync, stopping playing, and/or skipping tracks [Investigating]

[Markus_Kirchhofer]

Still no more issues here - since following this advice: NAD/Bluesound Grouped Zones out of sync, stopping playing, and/or skipping tracks [Investigating] - #89 by ToKr
Posted on Oct 23 by ToKr
I am crossing my fingers that it stays like this.

[iefbo]

This seems to have done the trick for me as well!!
THANK YOU!!

[JAM]

I wanted to add to the very helpful suggestion from @ToKr to add 1000ms to resync delay for each Bluesound device. This has worked great so far to sync my three Nodes, but my Cambridge Audio CXN v2 was not in sync with those devices. What solved that problem was keeping resync delay at 0 for the CXN v2 and setting clock master priority to 1 (highest). Now all devices are in sync (I hope this persists!).

[Tamir_Dotan]

Roon Server Machine

I have the core on pretty new Macmini (M1) wired connected and playing it directly to the amp via USB and ifi USB to digital coax converter, and a second device, Bluesound flex2i with a wired connection.

Networking Gear & Setup Details

all wired connections

Connected Audio Devices

I have the core on Macmini (M1) wired connected and playing it directly to the amp via USB and ifi USB to digital coax converter, and a second device, Bluesound flex2i with a wired connection. this is the only group I have

Number of Tracks in Library

playing through Tidal

Description of Issue

I am experiencing delays after a while of playing. if I pause the playlist and resrat it, delays are gone, after a while it comes back. Seems like a buffering issue. I only have for few months now, its been ok for years, its been introduced in one of the latest update. any ideas how to solve this?
thanks

[Ettrig (Anton)]

Sadly my issues re-surfaced

I just updated to BluOS 4.2.1… I wonder if something is improved (I doubt it…)

[Markus_Kirchhofer]

Hmmm.
Still, everything works fine here.
Running BluOS version 4.2.10.

[Stephen_Horvath]

I have two Node 2is, one Node and a Pulse 2i on Ethernet with two Flex 2i on wireless. The two wireless Flex 2i are in the kitchen, one is assigned left and the other is assigned right. Whenever the zones go out of sync, the kitchen with the two Flex 2i was the culprit. I am using 4.2.10, but I cannot remember if I have had sync issues after updating to 4.2.10.

[Steve_Arends]

Brilliant, It worked!

[Sander_Zwier]

Thank you, so far this works reliably for me.

[noris]

Hello everyone,

It’s been a while since there was any activity on this thread. Could you please confirm if this issue is still ongoing or if it has been resolved for those affected?

I’ll set a topic timer for the thread to auto-close in two weeks, however, if you are still experiencing this behavior, please let us know, and we’ll be happy to re-evaluate. Thank you!

[noris]

The thread has been moved to the following link, please see any updates here:

NAD/Bluesound Grouped Zones out of sync [Investigating]

Hello All, Thank you for confirming that this issue is still ongoing for you. To keep only the most relevant information from a long thread, we have created a new thread here to track this issue. We are in active communication with Bluesound regarding this issue and they are investigating this on our end. We will leave this thread open in case more information is needed or they share any updates with us regarding the progress of their investigation, thanks!