What’s happening? · Other How can we help? · None of the above Other options · Other Describe the issue I upgraded from 1.18 to 2.0. I am now running server 2.52(build 1538). My Rock is using System is OS Version 1.0 (build 259). I believe the current version of the OS is newer and has tailscale.…

Hellop @Jorge_Espinosa , Thank you for reaching Roon support, and we are glad to hear that everything is working as expected for now. To clarify briefly — switching the Intel NUC’s boot mode from Legacy BIOS to UEFI cannot be done “on the fly” because it requires a complete OS reinstall. This is du…

Only newer installations configured for UEFI boot support Tailscale as far as I’m aware. Maybe another user can confirm if your NUC can be configured accordingly and how. In the meantime, please have a look at the install guide to see if he contains relevant information too: [image] ROCK …

[Schermafbeelding 2025-06-22 214414] This is the current version of ROCK on my NUC. I didn’t have to go into the BIOS to change any settings. It worked right out of the box here. Made a bootable ROCK installation USB stick. Booted the NUC from it. Had it erase the internal SSD and just set it up. …

I just found: [image] FYI: Move Roon ROCK NUC to UEFI boot ROCK I thought I would give a brief description of my successful move to UEFI boot (and a minor niggle or question on something odd): Originally set up a NUC10i7FNH with ROCK - at the time only legacy boot was su…

Not mine regretably. Every time I reinstall I get 1 (259) again. I dont my Nuc 8 I7 is listed on the compatability table and has run fine for 5 years. Don’t know any way to check the bios from Roon OS.

Thanks. Unfortunately if UEFI is a pre-requisite to using tailscale then it becomes very complicated since it requires reinstalling the entire system. Can’t switch to UEFI after system is already installed. Just not worth the headache. Shame.

AI-overzicht To enter the BIOS setup on an Intel NUC8i7BEH1, you need to press the F2 key repeatedly during the initial boot sequence, right after powering on the device. You should see a prompt like “Press F2 to enter Setup” or a similar message on the screen as the NUC starts up. If you miss the …

From what I read on other posts if I switch to UEFI I have to reinstall. I cannot just modify the booth since it will no longer see my current drive.

[image] Jorge_Espinosa: it requires reinstalling the entire system. Yes of course. [image] OS update fails after upgrading to Roon 2.0 (ref#ID11C5) Support From what I read on other posts if I switch to UEFI I have to reinstall. I cannot just modify the booth sinc…

Thanks. I have not had to use the support forum in a long time (running 1.8 with no problems). I forgot what an incredibly talented and generous bunch of people are on the forum. Thanks all.

OS update fails after upgrading to Roon 2.0 (ref#ID11C5)

Support

BlackJack June 22, 2025, 7:48pm 4

I just found:

Maybe this helps.