Storage not selectable

Audio Gear Talk Mytek
1

Hello,

My problem is that no storage can be defined. I am currently setting up a new hard disk as the storage location for the Mytek Brooklyn Bridge II as Roon Core. No problem so far. Backed up today, then added more files to the hard drive on the Mac, reconnected to Mytek Brooklyn Bridge II, set up the backup as a restore to get the previous library. But the external hard disk is not recognized, no other option for external storage is displayed. It can’t be the hard disk (it is recognized elsewhere, is ExFat formatted and is also recognized by the temporary Mac-Roon-Core (is of course deactivated again!). The Mytek BBII is in the correct network, set up as an internal core, but no storage location appears under Storage settings, where many folder options are usually displayed.

What can I do?

Thank you very much!

Jochen Frühinsfeld

2

Contact Mytek support if you use their device as Roon Server.

3

I believe the Mytech runs RoonOs I read on here I think Danny mentioned it or it’s their own Linux os therefore it would need to format the drive itself for internal use and would be ext4 I don’t think you can’ just connect it up if formatted outside and I imagine exFAT only for external drives.

4

It’s about an externally connected SSD. Strange that it was recognized before, but not now. Another SSD with the same ExFat formatting is recognized, the SSD not recognized on the Mytek does not cause any problems on other devices. It is mysterious, but really seems to be due to the SSD-Mytek interaction, but is recognized in the settings in Roon