Am I able to connect the RCA and XLR outputs simultaneously? I’d like to use the XLR direct to monoblocks and the RCA to my headphone amp.
Lumin generally does not recommend simultaneous connection of XLR and RCA outputs. In case of T2, sound quality degradation should be very minimal. Depends on particular setup, there is a higher potential for ground loop.
From thread Need advice please with HEGEL - #640 by Andrew_Dean1
With the Lumin T2 / D2 / D1, you may try this configuration if it is not causing a ground loop in your setup.
Simultaneous analog XLR / RCA connection is not recommended for Lumin X1 / S1 / A1 / T1 as that will cause a SQ degradation.
1 Like