Hi folks, When a subsequent song being played in my setup has a different sample rate, there can be a very loud burst of noise between songs. Usually there is a click when changing the sample rate, but occasionally there is a very loud burst of noise. It cannot be predicted or repeated by replaying…

Try and use some Resync Delay: [image] Audio Setup Basics Accessing Audio Settings To access audio settings, click the settings cogwheel from the navigation bar, then choose the Audio tab. Inside the Audio tab, you'll be presented with a list of audio output devices, grouped by type, an…

I used short and long resinc delays and cannot discover any influence of that.

The issue described is usually a flaw in the DAC’s adaptation to the source sample rate/format. But you are not telling what your setup looks like… Start by posting a screen shot of the signal path of the offending Audio Zone, please.

Hi, here is, I think, the information Mikael was asking for. The signal path: [afbeelding] Resync setting: [afbeelding] I do not use any resampler. The DAC has an ESS Sabre 32 chip. KR

Post in the Auralic section of the forum may be better suited. If you need Roon Support see: [image] How to get help with Roon Support Do you need help with one of our products? Well, you’re in the right place! Just click on the “Get Help” button at the top of the Suppor…

[image] KeysAndSax: I do not use any resampler. The DAC has an ESS Sabre 32 chip. KR Thanks! In this case, Roon speaks nicely with the Aries G2.x, but the issue of various sample rates and the adaptation to those lies within the receiver of the DAC (USB or possibly SPDIF, AES/EBU). There a…

BlackJack, thx for tip on how to get Roon support Hi Mikael, Putting the output delay down the line towards the Aries is the solution! The noise burst seemed random but now there is also logic in it. My DAC has separate crystals for the 44.1 and 48 kHz as basic frequencies. The noise burst can be …

Update. Occasionally there were still some noise bursts. Now I use USB and did put delays in Roon and in the Aries G2 on 0 ms and there is no problem with the bursts. Finally just music to love.

Loud burst of noise at change in sample rate

Roon Software Discussion

BlackJack May 13, 2025, 7:24pm 6

Post in the Auralic section of the forum may be better suited. If you need Roon Support see: