Transfer Hard Drive and Data from Roon Nucleus+ to Roon Titan (ref#32U6ES)

[Wade_Oram]

The first part, removing the hard drive from the Nucleus is just the reverse of installing Nucleus Internal Storage

Once removed, the new disk is installed in the Titan using a very similar procedure. Once you have removed the disk from the Nucleus Plus, installing it in the Titan should be self explanetory.

However, @Collin_Bruce gave a brief outline of the Titan install in the post below:

Nucleus Titan SSD installation?

Basically, yes. It’s actually easier than RevA, IME. Bottom cover comes off via a few machine screws. You are immediately presented with the metal drive caddy. Four #2 phillips-head machine screws detach the caddy from the Titan chassis. You pull that out and will find the Four #1 screws for the drive itself already mounted in the drive caddy, staring up at you. Superbly convenient. The only “tip” I can think of is to be mindful of the direction of the SATA ribbon connector; it can’t be inver…