Transferring 4TB Samsung Drive from Nucleus+ to Titan with Different Internal Boards (ref#HODDI9)

[mjw]

You don’t need the cables or open the case. As linked, the SSD plugs into a compartment on the underside of the Titan.

Nucleus Titan SSD installation?

Basically, yes. It’s actually easier than RevA, IME. Bottom cover comes off via a few machine screws. You are immediately presented with the metal drive caddy. Four #2 phillips-head machine screws detach the caddy from the Titan chassis. You pull that out and will find the Four #1 screws for the drive itself already mounted in the drive caddy, staring up at you. Superbly convenient. The only “tip” I can think of is to be mindful of the direction of the SATA ribbon connector; it can’t be inver…