NVMe + 5th generation NUC causing kernel panic in ROCK install

[wklie (Peter Lie)]

ROCK on NUC NUC7i7BNH - Install Problem

My issue is probably because I’m using an NVMe

You’re running a fifth-generation NUC, instead of the seventh.

There were some discussions about NVMe issues with this generation:

Kernel Panic error on NUC 5i5 ROCK installation with NVME m.2 drive

[IMG_20180414_162646156] Hi @support I have a NUC 5i5RYH on which I was running ROCK using a 2.5" SATA III SSD but I decided to upgrade to an M.2 NMVE drive. I chose the m.2 drive from the Intel list of compatible hardware, with one qualification. It was the Corsair MP500 120 GB drive. (Technically, the 240 GB version, not 120 GB, was “Intel validated” for my NUC, but I didn’t need all that space.) When I install ROCK, after rebooting I get the ‘kernel panic’ screen attached, which looks simil…

Kernel panic on nuc5i3yk [NVMe incompatibility on 5th Generation NUC)

Install rock on a ssd but after reboot I’m getting a kernel panic: … mount: can’t read ‘etc/fstab’: No such file or directory mount: mounting /overlay/boot/roonos-1/rootfs.img on overlay/ro failed: No such file or directory … Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 Hardware: ssd: intel ssdpekkw128g7 Nuc: nuc5i3ryk Memory: 8Gb Windows 10 was preinstalled on the nuc. The image I flashed is: roonbox-linuxx64-nuc3-usb-factoryreset.img.gz What should be don…

@John_Webb did you solve the NVMe problem on your NUC5i5?